Lexmark 450dn - E B/W Laser Printer Podręcznik drukowania - Strona 14
Przeglądaj online lub pobierz pdf Podręcznik drukowania dla Drukarka Lexmark 450dn - E B/W Laser Printer. Lexmark 450dn - E B/W Laser Printer 17 stron. Help menu pages
Również dla Lexmark 450dn - E B/W Laser Printer: Konfiguracja i instalacja (2 strony)
Drukuj stronę
Connection guide
Note: For local printing, you must install the printer software (drivers) before connecting the USB cable.
Installing printer and software for local printing using Windows
1 Launch the Software and Documentation CD that shipped with the printer.
2 Click Install Printer and Software.
Note: Some Windows operating systems require that you have administrative access to install printer
software (drivers) on the computer.
3 Click Agree to accept the license agreement.
4 Select Suggested, and then click Next.
The Suggested option is the default installation for local setup. If you need to install utilities, change
settings, or customize device drivers, select Custom. Follow the instructions on the computer screen.
5 Select Local Attach, and click Finish.
Note: It may take a few minutes for the drivers to completely load.
6 Close the drivers CD installer application.
7 Connect the USB or parallel cable. If using USB, be sure to match the USB symbol on the cable to the USB
symbol on the printer.
Note: Windows 98 SE, Windows Me, Windows 2000, Windows XP, and Windows Server 2003 operating
systems support USB connections. Some UNIX, Linux, and Macintosh computers also support
USB connections. See the computer operating system documentation to see if your system
supports USB.
8 Plug one end of the printer power cord into the socket at the back of the printer and the other end into a
properly grounded outlet.
9 Turn on the printer.
Plugging in the USB cable and turning on the printer prompts the Windows operating system to run the plug
and play screens to install the printer as a new hardware device. The installation of printer software (drivers)
done in step 1 should satisfy the plug and play requirements. When plug and play is finished, a printer
object will appear in your Printers folder.
Note: After the printer completes its internal tests, the Ready message indicates that the printer is ready
to receive jobs. If you see a message other than Ready on the display, see the Software and
Documentation CD for instructions on clearing the message.
10 Send a test page to print.
Using a parallel cable
For instructions, see the Setup Sheet that shipped with the printer.
Local printing with Mac or UNIX/Linux
For detailed instructions, see the documentation that came with your operating system.
Connection guide
Page 1 of 2