KitchenAid 30" Freestanding Range Instrukcja instalacji - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Piekarnik KitchenAid 30" Freestanding Range. KitchenAid 30" Freestanding Range 8 stron. (61cm), (68.6cm), and (76.2cm) indoor/outdoor electric warming drawer
Również dla KitchenAid 30" Freestanding Range: Instrukcje instalacji (5 strony), Instrukcja instalacji (13 strony), Instrukcje instalacji (5 strony), Instrukcja instalacji (16 strony)

Drukuj stronę

Before you start...

Your safety and the safety of others

are very important.

We have provided many important safety messages in

this manual and on your appliance. Always read and

obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards

that can kill or hurt you and others.

All safety messages will follow the safety alert symbol

and either the word "DANGER" or "WARNING". These

words mean:

DANGER

You can be killed or seriously injured if you don't

immediately follow instructions.

WARNING

You can be killed or seriously injured if you don't

follow instructions.

All safety messages will tell you what the potential

hazard is, tell you how to reduce the chance of injury,

and tell you what can happen if the instructions are not

followed.

WARNING: If the information in this

manual is not followed exactly, a fire

or explosion may result causing

property damage, personal injury or

death.

– Do not store or use gasoline or

other flammable vapors and liquids in

the vicinity of this or any other

appliance.

– WHAT TO DO IF YOU SMELL GAS

• Do not try to light any appliance.

• Do not touch any electrical switch

• Do not use any phone in your

building.

• Immediately call your gas supplier

from a neighbor's phone. Follow the

gas supplier's instructions.

• If you cannot reach your gas

supplier, call the fire department.

– Installation and service must be

performed by a qualified installer,

service agency or the gas supplier.

Countertop opening dimensions that are shown

must be used. Given dimensions provide required

clearances.

To eliminate the risk of burns or fire by reaching

over heated surface units, cabinet storage space

located above the surface units should be avoided.

If cabinet storage is to be provided, the risk can be

reduced by installing a range hood that projects

horizontally a minimum of 5 inches beyond the

bottom of the cabinets.

Read electrical and carpentry instructions.

Proper installation is your responsibility. A qualified

technician must install this range. Make sure you

have everything necessary for correct installation. It

is the customer's responsibility to make sure that

the countertop has been properly prepared and that

the installation clearances specified on the

model/serial rating plate are met. The model/serial

rating plate is located on the oven frame behind the

oven drawer.

Check location where range will be installed. The

range should be located for convenient use in the

kitchen. Recessed installations must provide

complete enclosure of the sides and rear of range.

All openings in the wall or floor where range is to be

installed must be sealed.

IMPORTANT: Some cabinet and building materials

are not designed to withstand the heat produced by

the oven for baking and self-cleaning. Check with

your builder or cabinet supplier to make sure that

the materials used will not discolor, delaminate or

sustain other damage.

It is the customer's responsibility:

To contact a qualified electrical installer.

Panel A

Cabinet opening dimensions

25" (63.5 cm) countertop depth (with or without backsplash)

and 24" (61 cm) base cabinet depth, 36" (91.4 cm) countertop height

Freestanding Range

(7.6 cm)

4" (10.2 cm) min. clearance

from both sides of range to

side wall or other

combustible material.

Gas line opening can be

located within this shaded

area.

2" (5.1 cm)

4" (10.2 cm) min.

clearance from both sides

of range to side wall or

other combustible material.

(22.9 cm)

(7.6 cm)

Gas line opening should

be located within this

shaded area.

floor gas line opening if

directly below regulator

(5.1 cm)

To assure that the electrical installation is adequate

and in conformance with National Electrical Code,

ANSI/NFPA 70 — latest edition*, or CSA Standard

C22.1, Canadian Electrical Code, Part 1 — latest

edition**, and all local codes and ordinances.

NOTE: This appliance is manufactured for use with

Natural Gas. Conversion to L.P. Gas can be made

using the kit included in your literature package.

NOTE: The metal chassis of the range must be

grounded in order for the control panel to work. If

the metal chassis of the range is not grounded, no

keypads will operate. Check with a qualified

electrician if you are not sure the range is

grounded.

13" (33 cm) max.

upper cabinet depth

For minimum

30" (76.2 cm) cabinet

clearance to

opening width

cooktop, see

***Note

30" (76.2 cm)

opening width

9" (22.9 cm)

24"

(61 cm)

(15.2 cm)

18"

(45.7 cm)

10"

2-1/2" (6.4

(25.4 cm)

cm)

2-1/2" (6.4 cm)

floor gas line

opening if directly

below regulator

7/8" (2.2 cm) min.

required between

cabinet opening

and door or hinge

opening.

Slide-in Range

13" (33 cm)

max. upper

cabinet depth

For minimum

clearance to

30" (76.2 cm) cabinet

cooktop, see

opening width

***NOTE

30" (76.2 cm)

opening width

(15.2 cm)

18"

(45.7 cm)

10"

(25.4 cm)

2-1/2"

(6.4 cm)

Outlet should be

located within

24"

the 18" x 10"

(61 cm)

(45.7 x 25.4 cm)

2-1/2"

shaded area.

(6.4 cm)

7/8" (2.2 cm) min. required between

cabinet opening and door or hinge

opening.

IMPORTANT: Observe all governing codes and

ordinances.

Grounded electrical outlet is required. See

"Electrical requirements," Panel C.

Cabinet opening dimensions that are shown must

be used.

Do not pinch the power supply cord between the

range and the wall.

Do not seal range to side cabinets.

Copies of the standards listed may be obtained from:

*National Fire Protection Association

One Batterymarch Park

Quincy, Massachusetts 02269

** CSA International

8501 East Pleasant Valley Road

Cleveland, Ohio 44131-5575

*** NOTE: 24" (61 cm) min. when bottom of wood or

metal cabinet is protected by not less than 1/4"

(6.4 mm) flame retardant millboard covered with not

less than No. 28 MSG sheet steel, 0.015" (0.4 mm)

stainless steel, 0.024" (0.6 mm) aluminum or 0.020"

(0.5 mm) copper.

30" (76.2 cm) min. clearance between the top of the

cooking platform and the bottom of an unprotected

wood or metal cabinet.

18" (45.7 cm)

upper side cabinet

to countertop

Outlet should be

located within the 18" x

10" (45.7 cm x 25.4 cm)

shaded area.

18" (45.7 cm)

upper side cabinet

to countertop

IMPORTANT:

Rear vent must be

installed on all slide-in

models for proper

ventilation. See Step 7,

Panel D.