KitchenAid KEBC167MSS03 Instrukcja instalacji - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Piekarnik KitchenAid KEBC167MSS03. KitchenAid KEBC167MSS03 16 stron. 36" (91.4 cm) electric single built-in oven

Drukuj stronę
3-Wire Cable from Home Power Supply - U.S. Only
IMPORTANT: Use the 3-wire cable from home power supply
where local codes permit a 3-wire connection.
A
.........................
B
G
D
E
F_
A. Cable from home power supply
B. Junction box
C. Black wires
D. White wires
E. Green (or bare) ground wire
(from oven)
F 4-wire flexible cable from
oven
G. Red wires
H. UL listed wire connectors
I. UL listed or CSA approved
conduit connector
1. Connect the 2 black wires (C) together using a UL listed wire
connector.
2. Connect the 2 white wires (D) and the green (or bare) ground
wire (of the oven cable) using a UL listed wire connector.
3. Connect the 2 red wires (G) together using a UL listed wire
connector.
4. Install junction box cover.
/nst( si/Ove
,J'
,.4
Excessive
Weight Hazard
Use two or more people to move and install oven.
Failure to do so can result in back or other injury.
1. Using 2 or people, lift oven partially into cabinet cutout using
the oven opening as an area to grip.
NOTE: Push against seal area of oven front frame when
pushing oven into cabinet. Do not push against outside
edges.
\
2=
Push against seal area of front frame to push oven into
cabinet until shipping feet almost contact cabinet.
0
A. Shipping foot
3. On models with shipping feet, use a Phillips screwdriver to
remove screws attaching the shipping feet.
4. Push oven completely into cabinet and center oven into
cabinet cutout.
5. Securely fasten oven to cabinet using the #8-14 x 1" screws
(2 for single oven, 4 for double oven) provided. Insert the
screws through holes in mounting rails. Do not overtighten
screws.
6=
A. Mounting rail
B. Insert #8-14 x 1" screw.
On some models, the oven vent is taped to the side of the
oven. See the following instructions to install.
•
Insert the vent tabs (B) into slots (A) in the oven frame.
•
With one #8-18 x %" screw (C) for each side of the vent,
fasten vent securely to the oven.
D
C
A. Oven frame slot
B. Vent tab
C. #8-18 x 3/s" screw
D. Oven vent