ALICE NightOne Skrócona instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Sprzęt medyczny ALICE NightOne. ALICE NightOne 6 stron.

How to Put On the Sensors

Your healthcare provider will show you how to put on the sensors. They will also adjust

the effort belt for you. Use the instructions in this section to help remember how to put

on the sensors at home.

Wear a loose-fitting top (such as a t-shirt) on the night of your HST. Once you're ready

for bed, put the sensors on as directed below. Put them on while you're standing or

sitting up, not lying down.

Effort belt

1. Wrap the effort belt around your chest so the Alice NightOne device is in the

center of your chest (see Figure 3). The effort belt should be evenly across your

nipples or above your breasts. The belt should be snug but not too tight.

Figure 3. Effort belt around your chest

2. Plug the loose end of the effort belt into the Alice NightOne device (see Figure 3).

After the effort belt is connected, the good study indicator will blink green as the

device automatically turns on and starts recording.

3. Once the device is turned on, the effort belt icon will appear. It will probably be

flashing yellow. Use the buckle on the effort belt to adjust the belt so it's snug but

not uncomfortable (see Figure 4).