Avatar EMK-25 Podręcznik użytkownika - Strona 8
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Klawiatura Avatar EMK-25. Avatar EMK-25 8 stron. Midi keyboard
Również dla Avatar EMK-25: Podręcznik użytkownika (12 strony)
Drukuj stronę4.Modify the pedal(Sustain) parameters
In the MENU, step on the pedal to jump to the pedal setting interface, use the [UP] and
[DOWN] buttons to select parameters, and then use the selection knob to modify the
parameter values, below settings are available to change:
①Sustain's MIDI Channel.
②The value of Sustain can be set.
③The value of Pressed and Released.
5.Modify the parameters of Keybed
In the MENU, press the [KEYBED] button to get to the Keybed setting interface, use
the [UP] and [DOWN] buttons to select parameters, and then use the selection knob
to modify the parameter values, below settings are available to change:
①The MIDI Channel of Keybed.
②The value of Keybed's Transpose, transpose up or down, the most transpose is up
to 12 semitones.
③The velocity response curve of the Keybed.
④The value of Octave.
6.Copy and paste the parameters of pads
In the MENU, you can copy and paste the pad parameters. For example, after modifying
the parameters of PAD1, you can copy the parameters of PAD1, and then paste them to
other PADs.
Hit the pad you want to copy, then use the [COPY] button to copy the parameters of
the pad, the pad indicator blinks three times and then goes o ; hit the pad you want
to paste, then press the [PASTE] button to paste the copied pad parameters, the pad
indicator blinks three times and then turns o .
RESTORE FACTORY SETTINGS
In the standby interface, press and hold the [OK] button for 5s, a reset dialog box will
pop up, use the selector knob to select Yes, and then press the [OK] button to reset;
select No to cancel the reset process, and press the [OK] button to exit this interface.