Airgo ProCare IC Podręcznik - Strona 8

Przeglądaj online lub pobierz pdf Podręcznik dla Wózek inwalidzki Airgo ProCare IC. Airgo ProCare IC 12 stron.

Installing the swing-away elevating leg rest

1. Place the elevating leg rest assembly on the outside of the wheelchair

and install the hinge plates onto the hinge pins on the wheelchair frame.

2. Rotate leg rest assembly toward the inside of the wheelchair until it

locks in place.

3. Repeat STEPS 1-2 for the other leg rest assembly.

NOTE - The footplate will be on the inside of the wheelchair when the leg

rest is locked in place.

4. Once seated in wheelchair, adjust the footrest to correct height

by loosening the locknut and sliding the lower footrest tube up

or down until desired height is achieved.

5. Tighten locknut securely.

6. To release the leg rest, push the leg rest release handle toward the inside

of the wheelchair (facing the front of the wheelchair) and swing the leg rest

assembly to the outside of the wheelchair.

WARNING:

After ANY adjustments, repair or service and BEFORE use, make sure all attaching hardware

is tightened securely otherwise injury or damage may result.

Adjusting the swing-away elevating leg rest

1. To adjust the elevating leg rest, raise legs until the desired height

is obtained.

2. To reposition leg rest to normal position, support leg with one hand

and push release handle downward with the other hand.

3. To adjust the calf pad, turn the pad towards the outside of the wheelchair.

4. Slide the calf pad up or down until the desired position is obtained.

5. To secure the calf pad, turn the calf pad towards the inside of

the wheelchair.