Jandy Jandy Pro Series Instrukcja instalacji i obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Kontroler Jandy Jandy Pro Series. Jandy Jandy Pro Series 20 stron. Single element cartridge pool & spa cs filters
Również dla Jandy Jandy Pro Series: Instrukcja obsługi (12 strony), Instrukcja instalacji (16 strony), Instrukcja instalacji i obsługi (20 strony), Instrukcja obsługi (20 strony), Podręcznik (8 strony), Skrócona instrukcja obsługi (2 strony), Instrukcje instalacji (2 strony), Instrukcja instalacji i obsługi (16 strony), Instrukcja instalacji i obsługi (16 strony), Instrukcja instalacji i obsługi (16 strony)

Page 4

ENGLISH

Section 1. Safety Information

IMPORTANT SAFETY INSTRUCTIONS PERTAINING TO A RISK OF

PROPERTY DAMAGE OR INJURY TO PERSONS

READ AND FOLLOW ALL INSTRUCTIONS

When installing and using this equipment, basic safety precautions should always be observed, including the

following:

FOR YOUR SAFETY.

qualified in pool/spa installation and maintenance. Improper installation or operation could cause serious injury,

property damage, or death. Improper installation or operation will void the warranty.

Before installing this product, read and follow all warning notices and instructions accompanying it. Failure to

follow safety warnings and instructions could result in severe injury, death, or property damage.

To reduce the risk of injury, do not permit children to use this product unless they are closely supervised at all

times.

Risk of electric shock! Install the control box at least five (5) feet (152.4cm) from the inside wall of the pool and/

or hot tub using non-metallic plumbing. Canadian installations must be at least three (3) meters from the water.

Children should not use spas or hot tubs without adult supervision.

Do not use spas or hot tubs unless all suction guards are installed to prevent body and hair entrapment.

People using medications and/or having an adverse medical history should consult a physician before using a

spa or hot tub.

Sensor wires must be continuous and not spliced. Solder all low voltage wire connections when possible and

always use grease-filled wire nuts on low voltage connections.

ATTENTION INSTALLER: Install to provide drainage of compartment for electrical

components.

ATTENTION INSTALLER: This manual contains important information about the installation,

operation and safe use of this product. This information should be given to the owner/operator

of this equipment.

Jandy Pro Series Levolor

Models K-2100

This product must be installed and serviced by a professional service technician,

CAUTION

SAVE THESE INSTRUCTIONS

II Electronic Water Leveler

WARNING

Installation and Operation Manual