HIKVISION DS-7608NI-I2/8P Skrócona instrukcja obsługi - Strona 10
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Sprzęt sieciowy HIKVISION DS-7608NI-I2/8P. HIKVISION DS-7608NI-I2/8P 17 stron.
1 0
A D D I P C A M E R A S ( c o n t i n u e d )
11
V I E W L I V E V I D E O
Live View displays real-time video.
12
S E T U P R E C O R D I N G
The system defaults to continuously record video at 8 fps, or at 15 fps when motion is detected.
Recording Schedule
Default is to continuously record everyday. Do the following to change the recording schedule:
1. Go to MENU > RECORDING CONFIGURATION > SCHEDULE.
2. Choose CONTINUOUS or EVENT/(MOTION DETECTION) under the Type pull-down menu.
3. Use cursor to select (days will turn blue [continuous] or yellow [event/motion detect]) or deselect
(days will turn gray [off]) the calendar days you wish to record.
NVR CAMERA CHANNELS
PLAY
EDIT (Pencil)
CAMERA LIST (White)
LAN CAMERAS LIST (Yellow)
CAMERA CONNECTED
CAMERA DISCONNECTED
PASSWORD VISIBLE
ENABLE H.265
Icons in the upper right of screen show
each camera's record and alarm status.
• Alarm (video loss, tampering, motion
detection, sensor alarm, or VCA
alarm)
• Record (manual record, continuous
record, motion detection, alarm, or
VCA triggered record)
• Event/Exception (event and
exception information appears at
lower-left corner of screen)
Cameras connected to NVR
Play camera's live video
Change IP address (in LAN range)
Added cameras
Detected cameras will appear here
Shows camera is connected
Shows disconnected camera
Show passwords
Use H.265