Gardena PowerMax 1600/37 Instrukcja obsługi - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kosiarka Gardena PowerMax 1600/37. Gardena PowerMax 1600/37 15 stron. Electric lawnmower
Również dla Gardena PowerMax 1600/37: Instrukcja obsługi (10 strony), Instrukcja obsługi (15 strony)
Drukuj stronę
Problem
Loud noises, the mower
is rattling
Mower runs unevenly or
vibrates strongly
Lawn is not cleanly mowed
NOTE: For any other malfunctions please contact the GARDENA service department.
Repairs must only be done by GARDENA service departments or specialist dealers
approved by GARDENA.
7. TECHNICAL DATA
Corded Lawnmower
Rated power
Mains voltage
Mains frequency
Speed of rotation cutting blade R/min
Cutting width
Cutting height adjustment
(5 positions)
Volume of grass box
Weight
Sound pressure level L
Uncertainty k
pA
Sound power level L
WA
measured/guaranteed
Uncertainty k
WA
Hand/arm vibration a
Uncertainty k
a
Measuring process complying with:
NOTE: The stated vibration emission value has been measured according to
a standardized test procedure and can be used for comparison of one electric
power tool with another. It can also be used for preliminary evaluation of exposure.
The vibration emission value can vary during actual use of the electric power tool.
Possible Cause
Screws on engine, its fixing or
on the mower housing are loose.
Blade is damaged / worn or the
blade mounting is released.
Blade is very dirty.
Blade is blunt or damaged.
Cutting height is too low.
Unit
Value (Art. 5037)
W
1600
V (AC)
230
Hz
50
3200
cm
37
mm
20 – 60
l
45
kg
13.7
1)
84.7
pA
dB (A)
3
2)
:
94.6 / 96
dB (A)
1.79
1)
2.99
vhw
2
m/s
1.5
1)
2)
EN 60335-2-77
RL 2000/14/EC
Remedy
v Let the screws be tightened by
an authorised specialist dealer
or the GARDENA Service.
v Let the blade be tightened
or replaced by an authorised
specialist dealer or the
GARDENA Service.
v Clean the mower
(see 4. MAINTENANCE). If this
does not rectify the problem,
contact the GARDENA Service.
v Let the blade be replaced by
the GARDENA Service.
v Raise the cutting height.
Value (Art. 5042)
1800
230
50
3200
42
20 – 60
45
15.2
84.4
3
93.6 / 96
2.55
< 2.5
1.5
19