Gardena 1753 Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Pompa wodna Gardena 1753. Gardena 1753 17 stron. Pressure tank unit

Gardena 1753 Instrukcja obsługi

4. Operation

Starting the Pressure Tank
Unit:
FILL
RUN
0
e
q
FILL
RUN
ECO switch:
ECO
MAX
Note on the use of sprinklers:
16
DANGER! Electric shock!
v Before filling the pump, unplug the equipment from
WARNING! Pump running dry!
v Fill the pump to the overflow (approx. 2 to 3 l) with
q
1. Unscrew the cover
2. Turn the rotary switch
The integrated non-return valve will open.
3. Open the air bleed
4. Open any valves in the delivery line (watering accessories, water
stop, etc.) and drain off any residual water in the delivery hose
so that the air can escape during filling and priming.
w
5. Slowly pour pumping medium (approx. 2 to 3 l) through the filler
e
neck
6. Screw the filter chamber cover
until it stops.
7. Close venting
8. Insert the mains plug into a 230 V mains socket.
CAUTION! The pump will start immediately!
Once the maximum pressure is reached the pump will switch
off automatically. When the pressure falls below the minimum
value due to water being drawn off, the pump will switch on again
q
automatically.
The maximum self-priming head of 8 m is only achieved if the
pump is filled until it overflows from the filler connection
the delivery hose is held high enough during self-priming so that
no water can escape from the pump via the delivery hose. It is
not necessary to hold up the delivery hose if filled suction hoses
with backflow preventer are used.
In order to save energy (up to 15 %), the cut-out pressure on the
pump can, depending on the individual application, be regulated
between ECO and MAX (the pressure difference between ECO
and MAX totals approx. 1 bar).
r
v Turn the ECO rotary switch
Depending on the flow rate of the sprinkler, an uneven watering
pattern may occur through the pump being switched on and off
automatically.
the mains.
water each time before the pump is switched on,
so it does not run dry.
0
of the filter chamber by hand.
q
to FILL.
w
.
until water emerges from the air bleed
w
and turn rotary switch
r
w
.
0
closed again, turning by hand
q
to RUN.
to the required position.
e
and