Gardena 19080 Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Pompa wodna Gardena 19080. Gardena 19080 18 stron. Smart automatic home & garden pump
Również dla Gardena 19080: Instrukcja obsługi (9 strony)

Drukuj stronę

1. Operation

Factory reset:

Reset

To start the pump:

The smart Pressure Pump will be reset to the factory settings.

1. Push and hold down the Reset key for at least 5 seconds.

1. Loosen the lid

provided.

2. Slowly fill in the liquid to be pumped into the filler connection

(approx. 2 to 3 l) until the water level no longer drops under the

suction side inlet or the water flows out at the horizontal connec-

tor. With fixed installations, loosen the black lid

liquid until it flows towards the horizontal connector.

3. Drain the remaining water from the pressure hose to allow air to

escape during the filling and extraction processes.

4. Open all shut-off devices in the pressure line (watering accesso-

ries, valves, etc.), to allow air to escape during intake. If the delivery

line cannot be emptied due to fixed installation, loosen the black

lid

. Considerable amounts of liquid may escape. Please keep

a sufficiently large container at hand for collection.

5. Tighten the lid

6. Lift the pressure hose directly upstream of the pressure output.

7. Connect the power cable into a mains socket.

After 3 sec. the pump will start and the power LED

8. Close the shut-off devices in the delivery pipeline when the pump

begins to continuously convey water.

9. The pump turns off automatically approx. 10 seconds after you

closed the shut-off device.

The pump is in normal operation (Standby).

The specified maximum selfpriming level (see 8. TECHNI

CAL DATA) is reached only when the pump is full and the

pressure hose is held up high directly upstream of the pres

sure output during the first selfpriming phase. This ensures

that the pumped medium cannot leak from the pressure

hose. When using a full suction hose with a check valve, it is

not necessary to hold up the pressure hose.

The suction process can take up to 6 min. If no water is

pumped afterwards, the Pump will stop automatically and

the GARDENA smart App displays an Error.

of the filter chamber with the spanner

of the filter chamber up to the stopper

and fill with

lit green.