Gardena 20000 AS DIRT Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Pompa wodna Gardena 20000 AS DIRT. Gardena 20000 AS DIRT 17 stron.

Drukuj stronę

The manual operation remains active even after discon-

necting the power supply.

To stop manual operation, disconnect the pump from the

mains and take it out of the water. Connect the pump to

the power supply again and keep sensor field

until it is acknowledged by double flashing of all LEDs.

Now you are again in automatic mode.

Only operate the manual mode under supervision.

Time-limited manual operation:

In time-limited manual operation, the sensor fields are

deactivated for 10 minutes. The pump then runs for

10 minutes and then switches off automatically.

v Keep the sensor fields

double flashing of all LED's has acknowledged the

input.

All LEDs will light up and within 10 seconds all LEDs will

switch off one after the other. The pump starts.

After 10 minutes the pump automatically switches back

to automatic operation.

4. MAINTENANCE

DANGER! Risk of physical injury!

Injury when the product starts accidentally.

v Disconnect the product from the mains before

you maintain the product.

To clean the pump:

DANGER! Risk of physical injury!

Risk of injury and risk of damage to the

product.

v Do not clean the product with a water jet

(in particular high-pressure water jet).

v Do not clean with chemicals including petrol or

solvents. Some can destroy critical plastic parts.

5. STORAGE

To put into storage:

The pump is not frost-proof!

The product must be stored away from children.

1. Disconnect the pump from the mains.

2. Turn the pump upside down until no more water runs

out.

3. Clean the pump (see 4. MAINTENANCE).

4. Store the pump in a dry, enclosed and frost-free place.

pressed

and

pushed until the

After disconnecting the power supply, the pump auto-

matically switches back to automatic operation.

To return to the automatic mode again, push and hold the

2 sensor fields

and

simultaneously until the double

flashing of all LEDs has acknowledged the input.

Flat suction / normal operation (only for the clear

water submersible pumps) [ Fig. O2 ]:

Normal operation:

Recommended operating mode for maximum pumping

capacity and grain size up to 5 mm, especially in automatic

mode.

v Fold the 3 folding feet

(F)

Flat suction:

The residual water height of approx. 1 mm is only achieved

with flat suction in manual operation. Please note that in

this mode the delivery and suction capacity is reduced.

(F)

v Fold the 3 folding feet

v Clean the surface of the pump with a damp cloth.

To flush the pump:

After pumping water containing chlorine, detergents or

heavily soiled water, the pump must be flushed.

1. Pump lukewarm water (max. 35 °C), possibly adding

a mild cleaning agent (e. g. detergent) until the pumped

water runs clear.

2. Remove residuals according to the waste disposal laws

applicable in your area.

Disposal:

(in accordance with RL2012/19/EC)

The product must not be disposed of to normal

household waste. It must be disposed of in line

with local environmental regulations.

IMPORTANT!

v Dispose of the product through or via your municipal

recycling collection centre.

inwards.

outwards.