Avaya IP Office 4606 Instrukcja instalacji - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Telefon IP Avaya IP Office 4606. Avaya IP Office 4606 8 stron.
Drukuj stronę
DHCP Installation
DHCP Installation
DHCP Installation Preparation
4600 Series IP Telephone Installation
IP Office
This installation process uses the IP Office Control Unit as a DHCP Server
and H323 Gatekeeper to assign IP and telephony settings to the 4600
Series IP telephone. It also assumes that the Manager application is used
as the TFTP server during installation. This is the simplest method of
installation.
1. Voice Compression Module
The IP Office Control Unit must be fitted with a Voice Compression
Module (VCM).
a. Using an asynchronous terminal program such as HyperTerminal,
connect to the DTE port of the Control Unit (refer to the Manager
Application Manual for full details).
b. Enter AT, the response OK indicates correct connection.
c. Reboot the Control Unit. Within the terminal program you will see
the progress of the reboot. The line "Voice Compression PCB
detected" indicates the presence of a VCM. The next lines indicate
whether it is a 5, 10, 15 or 20 port VCM.
2. Control Unit Settings
Using the Manager Application, open the configuration and select the
System form. Check the following:
a. System Name:
In the System tab ensure that a Name for the Control Unit has been
entered.
b. TFTP Server IP Address:
In the LAN1 tab, enter the IP address of the Manager PC as the
TFTP Server IP Address.
c. Gatekeeper Settings:
In the Gatekeeper tab, ensure that Gatekeeper Enabled and Auto-
create Extn Enable are both selected.
d. If you have made any changes, upload the new configuration to the
Control Unit.
e. Within Manager, select File | Preferences and ensure that the
address is 255.255.255.255, otherwise TFTP will not work.
3. IP Phone Software
Ensure that the correct software files are present in the Manager
directory. The files required are:
•
46xxxupgrade.scr
•
Bbla0_11.bin
•
def06r01_1.bin
•
def24r01_1.bin
4. Manager and TFTPLog
Leave Manager running. It is also useful to have Manager's TFTP Log
visible (select View | TFTPLog). This will display the progress of file
requests.
40DHB0002UKCJ - Issue 5 (08/03/2002)
Page 5
Page 5