KitchenAid 36" Instrukcja instalacji - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Okap wentylacyjny KitchenAid 36". KitchenAid 36" 16 stron. 30” and 36” gas sealed burner glass cooktops
Również dla KitchenAid 36": Instrukcje instalacji (5 strony)

Drukuj stronę

4. Place burner assembly over spill guard, making sure burner's

rear flange is seated in slot.

5. Check the surface burner and grill flames. Refer to the

"Electronic Ignition System" section.

6. Install the wave tray into the grill. The tab in the left rear

corner of the bay must fit through the slot in the left rear

corner of the wave tray.

A. Slot for locating tab

B. Locating tab

7. Place the wave plate on the wave tray. The wave plate must

be centered on the wave tray.

A. Wave tray

B. Wave plate

8. Replace grill grate.

The griddle is factory installed.

1. Place drip tray in the well at the front of the griddle. Slide tray

toward the back until it stops.

2. Clean and season griddle before using. Refer to the Use and

Care Guide that came with your cooktop.

3. Check the surface burner and griddle flames. Refer to the

"Electronic Ignition System" section.

Install Griddle

(on some models)

A. Griddle drip tray

B. Griddle