Gardena FFP 3000 Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Pompa wodna Gardena FFP 3000. Gardena FFP 3000 11 stron. Underwater filter with fountain pump set
Również dla Gardena FFP 3000: Instrukcja obsługi (10 strony)

Drukuj stronę

Fault

No water feature operating

Reduced water feature

Pump shuts down after

a short time

In the event of other faults please contact GARDENA Service.

Repairs should only be carried out by GARDENA service centres or dealers

authorised by GARDENA.

7. Putting into Storage

Storage /

Overwintering :

Disposal :

(in accordance with

RL 2002 / 96 / EC)

8. Accessories

GARDENA

Underwater lights

GARDENA

radio control set

Possible cause

Mains plug not plugged in.

Impeller unit is blocked.

Electronic circuit breaker

has been activated.

Water feature insert is dirty.

Filter clogged.

Water temperature too high.

The storage location must not be accessible to children.

1. Remove the underwater filter and fountain pump from the pond

before frost is expected and clean.

2. To avoid difficulties when starting up in the spring, we recom-

mend storing the pump in a frost-free location in a container

filled with water.

The mains plug must not be submerged.

The product must not be added to normal household waste. It

must be disposed of in line with local environmental regulations.

v Important: Make sure that the unit is disposed of via your

municipal recycling collection centre.

Illuminate water features and

the edges of the pond.

Start water features and lighting

from the terrace or your living

room.

Remedy

v Plug in mains plug.

v Clean pump.

v Stand the pump in the

water.

v Clean water feature insert.

and nozzle pipe.

v Clean filter.

v Maximum water

temperature is 35 °C.

Art.-Nr. 7952 / 7954

Art.-Nr. 7874