Gardena FFP 5000 Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Pompa wodna Gardena FFP 5000. Gardena FFP 5000 10 stron. Underwater filter with fountain pump set
Również dla Gardena FFP 5000: Instrukcja obsługi (11 strony)

Drukuj stronę

Cleaning the Fountain Insert :

6. Trouble-shooting

Cleaning the Pump:

Fault

No water feature operating

Reduced water feature

Pump shuts down after

a short time

If any other faults arise, please contact GARDENA Service.

7. Storing your Fountain Pump Set

Overwintering :

1. Unscrew fountain insert

2. Wash out the nozzle tube and fountain insert

Warning ! Electric shock !

V Please unplug the pump before carrying out

any maintenance works.

1. Remove the pump from the filter block (see 5. Maintenance).

2. Turn the pump housing

off the motor housing

3. Pull the impeller

4. Push the cleaned impeller

5. Press the pump housing

and turn it clockwise. (Bayonet fastening).

6. Reassemble the pump into the filter block (see

5. Maintenance).

Possible cause

Mains plug not plugged in.

Impeller unit is blocked.

Electronic circuit breaker

has been activated.

Water feature insert is dirty.

Filter clogged.

Water temperature too high.

The pump should be stored out of the reach of children.

1. Remove the Filter and Fountain Pump from the pond before frost

is expected and clean.

2. To avoid difficulties when starting up in the spring, we recom-

mend storing the pump in a frost-free location in a container

filled with water.

The mains plug must not be submerged.

from the nozzle tube

anticlockwise and pull it vertically

(Bayonet fastening).

out of the motor housing

back into the motor housing

vertically on to the motor housing

Remedy

v Plug in mains plug.

v Clean pump.

v Stand the pump in the

water.

v Clean water feature insert.

and nozzle pipe.

v Clean filter.

v Maximum water

temperature is 35 °C.

in clean water.

and clean it.