Gardena FP 2500 E Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Pompa wodna Gardena FP 2500 E. Gardena FP 2500 E 11 stron. Fountain pump set
Również dla Gardena FP 2500 E: Instrukcja obsługi (13 strony), Instrukcja obsługi (12 strony), Instrukcja obsługi (12 strony)

Drukuj stronę

Installing the set as a

stream pump :

4. Initial Operation

Putting into operation

as a fountain pump :

Putting into operation

as a stream pump :

The stepped nipple (½ " / ¾ " )

example, to a stream or source stone.

1. Release the catches

2. Screw the T-piece

3. Screw the stepped nipple

T-piece

4. Screw the cap

Note : In the event of an uneven foundation, the fountain can be

vertically aligned with the adjustable ball joint

1. When using a gargoyle, connect the hose of the gargoyle

to the stepped nipple

2. Place the pump with the fountain on a firm base so that the

filter housing

3. Undo the fixing nut

place nozzle tube

fixing nut

4. Connect the mains plug of the pump to

an A.C. socket.

Attention : pump starts immediately.

5. Unscrew Water Bell, Fleur-de-Lis or

Water Jets out of the nozzle tube

the fountain has the required shape.

6. Adjust the size of the fountain with the

regulating valves

7. Adjust the required amount of water of

the gargoyle with the regulating valves

Note : When using a ¾ " hose, the front part of the stepped

nipple can be cut off with a saw.

1. Connect the hose of the stream to the stepped nipple

2. Place the pump with the stepped nipple

on a firm base so that the filter housing

is completely covered by water (max. 2 m

under water).

3. Connect the mains plug of the pump

to an A.C. socket.

Attention : pump starts immediately.

4. Adjust the required amount of water with

the regulating valves

can be used for connection, for

and remove the filter bowls

onto the adapter

onto the side outlet of the

onto the T-piece

is completely covered by water.

of the ball joint

vertically and screw

tight again.

until