Broadata LB-H2-E Podręcznik użytkownika - Strona 14

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Nadajnik Broadata LB-H2-E. Broadata LB-H2-E 20 stron. Link bridge 4k uhd + audio embedder

Drukuj stronę

LB-H2-E User's Manual

Link Bridge 4K UHD+ Audio Embedder

6.0 MAINTENANCE AND TROUBLESHOOTING

4.1 Maintenance

There is no operator maintenance other then keeping the

units clean. However, observe the following light indicators

to make sure that the unit is working properly:

4.2 Troubleshooting

If the LB-H2/DE units do not operate properly after installation,

check for possible cable breaks, loose connections, and

incorrect cable connections. If problems persist that may be

fiber related, contact BCI at 1-800-214-0222 for further

assistance.

For electrical problems, perform the following troubleshooting

procedures:

1. If the POWER indicator is OFF, check for the following:

a. The line cord is plugged into the unit and your outlet

has power.

2. If the POWER indicator is ON, but the Link indicator is

OFF, check for the following:

a. Make sure the appropriate cables are being used.

b. Cable and cable connectors are not broken.

c. For each unit, the transmit (TX) cable is connected to the

other unit's receiver (RX).

3. If the POWER indicator and Link indicator are ON, but

the channels are not operating, then:

a. Check to see that the attached user equipment is turned on.

b. Both ends of the link are connected to the corresponding

equipment and to the same corresponding channel port.

Broadata Technical Support, [email protected]