Lexmark E360D series (Niemiecki) Podręcznik uzupełniający

Przeglądaj online lub pobierz pdf (Niemiecki) Podręcznik uzupełniający dla Drukarka Lexmark E360D series. Lexmark E360D series 9 stron. Loading paper
Również dla Lexmark E360D series: Konfiguracja i instalacja (2 strony), Broszura i specyfikacje (4 strony), Broszura i specyfikacje (4 strony), Skrócona instrukcja obsługi (2 strony), Podręcznik uzupełniający (5 strony), Instrukcja rozwiązywania problemów (8 strony)

Lexmark™ E360

Quick Reference

Loading the standard 250-sheet

tray

The printer has two trays to select from: the standard tray (Tray 1),

also known as the 250-sheet tray, and either the optional

250-sheet tray or the optional 550-sheet tray (Tray 2). Only one

optional drawer (which includes an optional tray) may be attached

to the printer at one time.

Notes:

•

Proper paper loading prevents jams and facilitates

trouble-free printing.

•

Do not remove trays while a job prints or while Busy appears

on the display. Doing so may cause a jam.

Pull the tray completely out.

Squeeze the width guide tabs on the right guide as shown, and

slide the width guides to the sides of the tray. Notice that the

two width guides move in unison when you move just the right

width guide.

Squeeze the length guide tabs together as shown, and slide

the length guide to the correct position for the paper size being

loaded.

If you are loading a longer size of paper like A4 or legal, squeeze

the length guide tab and slide the length guide backwards to

the position for the length of paper you are loading. The tray

extends backwards as shown.

If you are loading A6-size paper:

Squeeze the length guide tab shown as follows, and slide

the length guide toward the center of the tray to the A5

size position.

Raise the A6 backstop.

Note: The standard tray only accommodates 150 sheets of A6

paper. Notice the maximum fill line on the A6 backstop which

indicates the maximum height for loading A6 paper. Do not try to

overload the tray.