Broadata LBC-H2CS-T/R-Lite Podręcznik użytkownika - Strona 6
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Przedłużacz Broadata LBC-H2CS-T/R-Lite. Broadata LBC-H2CS-T/R-Lite 14 stron. Link bridge hdbaset hdmi 2.0 exteder 4 play
Drukuj stronę2.2 Receiver Front and Rear Panels
2
1. LED: Power LED, Status LED, Link LED, HDCP LED
(a) Power LED: This LED light always shine is meant that
works fine.
(b) Signal LED: This LED light always shine is meant that
video signal works fine.
(c) Link LED: This LED light always shine is meant that
works fine.
2. Latch-locking power jack: Connect to 12V DC power supply
3. RJ45: Plug in a Cat-5/5e/6 cable that needs to be linked to
the transmitting unit LBC-H2CS-T-Lite
4. IR Receiver: Infrared 3.5mm socket for plugging in the
extension cable of IR receiver
5. IR Blaster: Infrared 3.5mm socket for plugging in the
extension cable of IR blaster
6. RS-232(terminal block format): The order of RS-232 pin
are TX, RX, GND (from the left side to the right)
7. Dip Switch: for F/W update ([ON] F/W update Mode; [OFF]
Normal Mode)
8. HDMI OUT: Connects to a HDMI display with HDMI male-
male cable
Broadata Technical Support, [email protected]
LBC-H2CS-T/R-Lite User Manual
Link Bridge
HDBaseT HDMI 2.0 Extender, 4 Play
TM
1
6
4
3
5
Front
LBC-H2CS-R-Lite
Rear
8
7
7