Gardena ComfortCut Plus 500/27 Instrukcja obsługi - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Trymer Gardena ComfortCut Plus 500/27. Gardena ComfortCut Plus 500/27 15 stron. Turbotrimmer
Również dla Gardena ComfortCut Plus 500/27: Instrukcja obsługi (16 strony), Instrukcja obsługi (16 strony), Instrukcja obsługi (9 strony), Instrukcja obsługi (16 strony)
Drukuj stronę
u
8
Setting the trimmer to
body height:
2
1
w
i
Adjusting the plant guard:
16
Working position 3:
The upright must be in the uppermost position in working
position 3.
8
1. Turn plant guard
it engages.
2. Press the foot pedal
uppermost position.
u
3. Press the button
until it engages.
4. With the impeller, move the trimmer along the lawn edge.
CAUTION! The trimmer may only be used provided that the
trimmer head is engaged at an angle of 0° or 90°.
Setting the shaft length:
v Loosen the clamping sleeve
desired shaft length and re-tighten the threaded collar
i
The clamping sleeve
prevent the shaft from being moved.
Setting the additional handle:
1
v Pull the lock
belonging to the additional handle
2
additional handle
If the trimmer is correctly set to the body height, the posture
is upright and the trimmer head in working position 1 is tilted
forwards slightly.
v Hold the trimmer by the handle
such a manner that the trimmer head is tilted forwards slightly.
8
Working position
8
v Turn plant guard
until it locks into place.
through 90° into the Parking position until
z
and move the upright into the
and rotate the trimmer head from 0° to 90°
i
, extend the handle
must be fastened firmly enough to
to the desired incline and release the lock
w
and additional handle
8
Parking position
through 90° into the required position
w
to the
i
.
2
, set the
1
.
2
in