Gardena EasyCut Li-18/23 R Instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Trymer Gardena EasyCut Li-18/23 R. Gardena EasyCut Li-18/23 R 16 stron. Accu turbotrimmer
Również dla Gardena EasyCut Li-18/23 R: Instrukcja obsługi (17 strony), Instrukcja obsługi (18 strony), Instrukcja obsługi (11 strony), Instrukcja obsługi (17 strony)
Drukuj stronę
ß
ß
A1
4. Initial Operation
Charging the battery:
4
5
5
9
8
9. Push the protective cover
a manner that the two arrows
10. Rotate the protective cover
engages.
11. Slightly widen the magazine
the shaft
A2
12. Slide up to 6 plastic blades
blades clamp into place.
20 plastic blades and a magazine for spare blades are included in
the delivery. Up to 6 spare blades can be stored in the magazine.
For information regarding the assembly of the blade into
q
the blade holders, please consult 8. Troubleshooting
"Replacing the plastic blade".
WARNING!
Overvoltage damages batteries and the battery
charger.
v E nsure the correct mains voltage.
Before using for the first time, the battery must be fully charged.
Charging time (for uncharged battery) see 10. Technical Data.
6
The lithium-ion battery can be charged in any state of charge,
and the charging process can be interrupted at any time without
harming the battery (no memory effect).
1. Depress both locking buttons
the battery holder
2. Plug the plug of the charger cable
3. Plug battery charger
Charging indicator lamp
once per second: Battery is being charged.
Charging indicator lamp
Battery is fully charged.
(For charging time, see 10. Technical Data.)
Battery charging status indicator during charging:
7
100 % charged
66 – 99 % charged
33 – 65 % charged
0 – 32 % charged
4. First remove the charging cable
unplug the battery charger
5. Slide the battery
it audibly engages.
onto the trimmer head
q
ß
A1
anti-clockwise until it audibly
q
at the open point and slide onto
w
.
2
into the magazine
e
4
on the handle.
6
into a mains socket.
8
at the charger unit flashes green
9
at the charger unit is lit green:
9
L1, L2 and L3 lit.
L1 and L2 lit, L3 flashing.
L1 lit, L2 flashing.
L1 flashing.
7
from the mains socket.
8
onto the battery holder
5
3
,
are opposite one another.
ß
A2
until the
w
and remove the battery
into the battery
.
7
5
from the battery
and then
5
on the handle until
6
in such
from
5
15