Gardena HS 36 Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Trymer Gardena HS 36. Gardena HS 36 12 stron. Accu hedge trimmer
Również dla Gardena HS 36: Instrukcja obsługi (9 strony)

Drukuj stronę

Adjusting the cutting height :

Mowing with the grass

collection sack

(accessories) :

6. Putting into Storage

Storage :

Disposal :

(in accordance with

RL 2002 / 96 / EC)

7. Maintenance

Note: The cylinder mower can be used in electric mode or as a

push-lawnmower without the electric drive.

DANGER ! Cutting tool can cause injuries !

V When adjusting the cutting height, wait until the

blade cylinder is stationary, put on suitable working

gloves and unplug from the mains.

The cutting height can be set to any

position between 12 mm and 42 mm.

1. Slacken the two locking screws

and set to the height required on

the scale

2. Tighten the two locking screws

on both sides to the same height.

The locking screws

be set to the same height on both sides.

The mower may only be adjusted to a depth in which the lower

blade does not touch the ground when it is uneven.

v Suspend the grass collection sack in the cylinder mower

as described in the Operating Instructions for the grass

collection sack.

1. Switch off the lawnmower and pull out the extension cable.

2. Clean mower before storage (see 7. Maintenance).

3. Store mower in a dry, frostproof but cool place out of reach of

children.

To save space, the cylinder mower can be folded up by folding

the clamping lever.

The product must not be added to normal household waste. It

must be disposed of in line with local environmental regulations.

DANGER ! Cutting tool can cause injuries !

V Before maintenance, wait until the cutting tool is

stationary, wear suitable work gloves and pull out the

mains plug.

DANGER ! Injury to persons and damage to property !

V Do not clean mower under running water (especially

at high pressure).

must always