Avaya 4620 Podstawy obsługi

Przeglądaj online lub pobierz pdf Podstawy obsługi dla Telefon Avaya 4620. Avaya 4620 15 stron. Infrared dialing
Również dla Avaya 4620: Podręcznik uzupełniający (2 strony), Skrócona instrukcja obsługi (1 strony), Podręcznik (4 strony), Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (2 strony)

AVAYA 4610 & 4620 – Phone Handling Basics

The Avaya phones use the latest advances in telephony systems. These IP (Internet Protocol) telephones

obtain their operational characteristics from our central telephone server rather than residing in the

phone unit itself. Updates and new features are downloaded to your phone without intervention or the

need for phone replacement. The phone features are displayed on the phone screen and the application

menus are accessed through the softkeys that surround the screen. The keypad and operational buttons

on the phone work in conjunction with the softkeys.

The 4610 and 4620 ePhone is programmed to display your extension number three times on the

Home screen. This will allow you to answer up to two calls at any given time and to place a call while two

calls are on hold. If a third call arrives, it will be forwarded to your voicemail. Basic telephone handling

features are covered below.

Answer a Call

When a call arrives at the telephone, you will hear a ring tone. A bell icon will appear on the screen along

with the caller's telephone number.

Step 1 – The Bell

icon appears on the display as the phone rings.

Step 2 – Lift the Handset or press the Speaker

Step 3 – Begin to talk. The Handset

Step 4 – To end the call, return the handset to the phone or press the Speaker

Answer a Call with a Headset

Step 1 – Connect the headset next to the handset connection on the side of the phone.

Step 2 – Press the Headset

Step 3 – Press the Line

Step 4 – To end a call, press the Drop

Answer a Second Call while on an Active Call

An active call will automatically be place on temporary hold when a second call is answered. The active

call will be dropped if the handset is returned to the phone or speakerphone is turned off.

Step 1 – Press the Line

automatically be place on hold and the icon will change to the Hold

Step 2 – Press the Line

be placed on hold.

Note: The phone will automatically place a call on hold as you switch back and forth between calls.

VCUnet -

VCU Technology Services

www.ephones.vcu.edu

icon appears on the screen to indicate an active call.

button to activate the headset.

softkey associated with the incoming call.

button.

softkey of the second incoming call. The first active call will

softkey to return to the previous call. The second call will automatically

button to answer the call.

button.

Problem Calls: 828-2227

Updated: 9/26/07