Gardena SmallCut Li-23R Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Trymer Gardena SmallCut Li-23R. Gardena SmallCut Li-23R 9 stron. Battery trimmer
Również dla Gardena SmallCut Li-23R: Instrukcja obsługi (9 strony), Instrukcja obsługi (10 strony)

Gardena SmallCut Li-23R Instrukcja obsługi
To insert the plastic blade:
v Slide the new plastic blade
(3)
(9)
the blade carrier
until it audibly engages (click).
When the new plastic blade is correctly inserted, it can be moved more
easily.
Problem
Possible Cause
Trimmer is not cutting
Plastic blade is worn or too
cleanly or not cutting at all
short.
Plastic blade is broken off.
Trimmer vibrates severely
Plastic blade is excessively
worn and creates an unbalance.
Blade carrier is worn.
Trimmer does not start.
Under voltage.
;
Charging control lamp
flashes green
Trimmer does not start.
Battery overload.
Charging control lamp
;
flashes red
Engine is blocked.
Battery temperature is out of
range.
(Lc)
Power LED
on the
Charging power supply is not
charging power supply
plugged in correctly.
does not illuminate
NOTE: For any other malfunctions please contact the GARDENA service depart-
ment. Repairs must only be done by GARDENA service departments or specialist
dealers approved by GARDENA.

7. TECHNICAL DATA

Battery Trimmer
Unit
Cutting width
cm
Rpm of blade carrier
R/min.
Weight
kg
Sound pressure level L
1)
dB(A)
pA
Uncertainty k
pA
Sound power level L
:
2)
WA
measured/guaranteed
dB(A)
Uncertainty k
WA
Hand/arm vibration a
1)
m/s
2
vhw
Uncertainty k
a
Measuring process complying with:
EN 50636-2-91
1)
NOTE: The stated vibration emission value has been measured according to
a standardized test procedure and can be used for comparison of one electric
power tool with another. It can also be used for preliminary evaluation of
exposure. The vibration emission value can vary during actual use of the electric power
tool.
Battery
Unit
Battery voltage
V (DC)
Battery capacity
Ah
Battery charging time
min.
80 % / 100 % (approx.)
Charging Power Supply
Unit
Mains voltage
V (AC)
Mains frequency
Hz
Rated Power
W
Output voltage
V (DC)
Max. output current
mA
8. ACCESSORIES
GARDENA Charging Power
Charger to charge the internal batteries.
Supply
GARDENA Spare Blades
As replacement for consumed plastic blades. Art. 5368
RotorCut for Turbotrimmer
10
from inside through the slot in metal of
Remedy
v Replace the plastic blade.
v Replace the plastic blade.
v Replace the plastic blade.
v Replace the blade carrier.
v Charge the battery.
v Release the start lever.
Start again.
v Remove the obstacle.
Start again.
v Use the battery in surround-
ings where temperatures are
between 0 °C and 40 °C.
v Plug the charging power
supply into a wall outlet.
Value (Art. 9822)
23
9500
1.7
71
3
86 / 88
1.5
< 2.5
1.5
RL 2000/14/EC
2)
Value
14.4
2.0
160 / 200
Value (Art. 9836-20.610.00)
100 – 240
50 – 60
15
18.5
600
Art. 9836-20.610.00
GARDENA Replacement
Available via the GARDENA Service.
blade carrier

9. SERVICE / WARRANTY

Service:
Please contact the address on the back page.
Warranty:
In the event of a warranty claim, no charge is levied to you for the services
provided.
GARDENA Manufacturing GmbH offers a two-year warranty (effective
as of the date of purchase) for this product. This warranty includes all
significant defects of the product that can be proved to be material or
manufacturing faults. This warranty is fulfilled by supplying a fully functional
replacement product or by repairing the faulty product sent to us free
of charge; we reserve the right to choose between these options. This
service is subject to the following provisions:
• The product was used for its intended purpose as per the recom-
mendations in the operating instructions.
• Neither the purchaser nor a third party has attempted to repair the
product.
This manufacturer's warranty does not affect warranty entitlements
against the dealer / retailer.
If problems arise with this product, please contact our Service depart-
ment or send the defective product along with a brief description of the
fault to GARDENA Manufacturing GmbH, making sure to have sufficiently
covered any shipping costs and to have followed the relevant postage
and packaging guidelines. A warranty claim must be accompanied by
a copy of the proof of purchase.
Consumables:
The plastic blade and the blade carrier are consumables and are not
included in the warranty.