Fronius 4,075,213 Procedura aktualizacji - Strona 6

Przeglądaj online lub pobierz pdf Procedura aktualizacji dla System spawania Fronius 4,075,213. Fronius 4,075,213 7 stron.

13) Selection of the correct configuration based on the rating plate of the machine.

The Service Tool already makes a pre-selection of the machine type, TP 150 or TP 180 then you just need to

select which variant you have: Standard, MV and the socket type (FUSE settings)

14) When you see this window opened, the upload is already running. Just wait until its finished.

You may need to restart the update several times, or restart your laptop, or switch off and on again the power

source. (In case of errors or upload failure)

09/2018

6/7