Lexmark MB2236 Skrócona instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Drukarka Lexmark MB2236. Lexmark MB2236 17 stron.
Notes:
•
View the printer IP address on the home screen. The
IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily
disable it to load the web page correctly.
b
Click Shortcuts > Add Shortcut.
From the Shortcut Type menu, select E ‑ mail, and then
c
configure the settings.
d
Apply the changes.
2
Load an original document into the ADF tray or on the scanner
glass.
3
From the control panel, navigate to:
Shortcuts > E ‑ mail
For non-touch-screen printer models, press
through the settings.
4
Select the shortcut.
Send the e ‑ mail.
5
Scanning
Scanning to a computer
Before you begin, make sure that:
•
The printer firmware is updated. For more information, see
"Updating firmware" on page
10.
•
The computer and the printer are connected to the same
network.
For Windows users
Note: Make sure that the printer is added to the computer. For
more information, see
"Adding printers to a computer" on
page
10.
1
Load an original document into the automatic document
feeder or on the scanner glass.
2
From the computer, open Windows Fax and Scan.
3
From the Source menu, select a scanner source.
If necessary, change the scan settings.
4
Scan the document.
For Macintosh users
Note: Make sure that the printer is added to the computer. For
more information, see
page
10.
1
Load an original document into the automatic document
feeder or on the scanner glass.
2
From the computer, do either of the following:
•
Open Image Capture.
•
Open Printers & Scanners, and then select a printer. Click
Scan > Open Scanner.
3
From the Scanner window, do one or more of the following:
•
Select where you want to save the scanned document.
•
Select the size of the original document.
•
To scan from the ADF, select Document Feeder from the
to navigate
Scan Menu or enable Use Document Feeder.
•
If necessary, configure the scan settings.
4
Click Scan.
Faxing
Sending a fax
Using the control panel
1
Load an original document into the ADF tray or on the scanner
glass.
2
From the control panel, navigate to:
Fax > enter the needed information
For non-touch-screen printer models, press
through the settings.
If necessary, adjust the settings.
3
Fax the document.
Using the computer
Before you begin, make sure that the fax driver is installed. For
more information, see
"Adding printers to a computer" on
to navigate
"Installing the fax driver" on page
10.
5
For Windows users
1
From the document that you are trying to fax, open the Print
dialog.
2
Select the printer, and then click Properties, Preferences,
Options, or Setup.
3
Click Fax > Enable fax > Always display settings prior to
faxing, and then enter the recipient number.
If necessary, configure other fax settings.
4
Fax the document.
For Macintosh users
1
With a document open, choose File > Print.
Select the printer that has ‑ Fax added after its name.
2
3
In the To field, enter the recipient number.
If necessary, configure other fax settings.
4
Fax the document.
Printing
Printing from a computer
Note: For labels, card stock, and envelopes, set the paper size
and type in the printer before printing the document.
1
From the document that you are trying to print, open the Print
dialog.
2
If necessary, adjust the settings.
3
Print the document.
Printing from a mobile device
Printing from a mobile device using Mopria
Print Service
®
Mopria
Print Service is a mobile printing solution for mobile
TM
devices running on Android
version 5.0 or later. It allows you to
print directly to any Mopria ‑ certified printer.