Gardena Accu 6 Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt do trawników i ogrodów Gardena Accu 6. Gardena Accu 6 7 stron.

Drukuj stronę
G
Warning!
v Please read the operating instructions before using this tool
for the first time.
v Do not use in rain or wet conditions.

Initial Operation

v Inspect these Edging Accu Shears before every use.
v Never disable the safety devices.
Do not use these Edging Accu Shears if the safety devices
and / or the blades have been damaged or are worn out.
Proper Use
v Only use the Edging Accu Shears for the purposes specified
in these instructions.
Warning !
V The Edging Accu Shears are not intended for cutting
Personal Injury
hedges or chopping in the sense of composting.
and Damage
to Property
Work Clothes
v Do not wear loosely hanging clothes or jewellery etc.
They could become caught in the machine.
v Wear gloves, sturdy shoes and long trousers to protect your
legs.
Working Area
You are responsible for the safety of the working area.
v Make sure that there are no other people (especially children)
or animals anywhere near the working area.
Area to be Cut
v Inspect the area to be cut before beginning. Remove any
objects from the area.
v Look for objects while you are working.
v If you should come across any obstacles when cutting, turn
off the shears by releasing the switch on button
Operating Your
v If the cutting blades become blocked, turn off the shears
Edging Accu Shears
(release the switch on button
(thick branch or another object) using a blunt device.
Never use your fingers to remove objects as the blades can
cause serious cuts and injuries.
Charging
The charging cable should be checked regularly for signs of
damage or ageing (brittleness) and may only be used if it is in
perfect condition.
Only use the original GARDENA charging device or one autho-
rised by GARDENA.
Non-rechargeable batteries must not be charged with this battery
charger (danger of fire).
The Edging Accu Shears must not be operated while the battery
is charging.
Working Conditions
Only work when visibility is good.
Be particularly careful when walking backwards. You might stumble!
v When working ensure you adopt a sturdy stance.
12
5
.
5
) and remove the object
Interrupting Your Work
v Never leave the Edging Accu Shears unattended at the work-
ing area. If you should interrupt your work, store the Shears
in a safe place.
v If you interrupt your work to move to another working area,
you must switch off the Edging Accu Shears until you reach
the new working area (release the switch on button
Never use your Shears when it is raining or in a damp, wet area.

3. Assembly

GARDENA Edging Accu Shears 3, 4 and 6 are supplied fully
assembled. The GARDENA Telescopic Swivel Handle (Art. No.
2525), which is available as an accessory, must be attached
to the shears.
Attaching the
v Push the extension handle
into the mounting point
Telescopic Swivel Handle :
desired angle.
The catch clicks into place.
Your Edging Accu Shears with
Telescopic Swivel handle are now
ready for use.
Removing the
v Press the release button
Telescopic Swivel Handle :
and pull out the handle.
4. Initial Operation
Before using your Edging Accu Shears for the first time and with
Charging the Accu :
empty accus, the accus must be charged for approx. 20 hours.
2
The usual charging time is about 14 hours. The accus discharge
1
themselves when stored for a longer period of time. Therefore, the
Shears should be recharged in a dry place before each operation.
3
Over-voltage damages accus.
A
V Ensure the mains voltage is correct.
1. Insert charging cable
Accu Shears.
2. Plug charging unit
3. Unplug Accu Shears from socket after 14 hours (normal) or
20 hours.

5. Operating Your Edging Accu Shears

For best cutting results, use your Edging Accu Shears when the
lawn is dry. There is no electrical danger, however, if the grass is
damp. The large contact surface makes the shears easy to handle.
G
5
).
E
15
F
at the
19
16
I
1
2
into charging socket
of the Edging
3
into a wall socket.
13