Lexmark MS410 series Skrócona instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Drukarka Lexmark MS410 series. Lexmark MS410 series 13 stron. Ms410 series monochrome laser printer
Również dla Lexmark MS410 series: Uwaga techniczna (3 strony), Arkusz ustawień (2 strony), Specyfikacje (2 strony), Instrukcja serwisowa (14 strony)

Drukuj stronę

•

Flex the stack of envelopes back and forth to loosen them, and

then fan them. Straighten the edges on a level surface.

Load the paper or specialty media.

Notes:

•

Do not force paper or specialty media into the multipurpose

feeder.

•

Make sure the paper or specialty media is below the

maximum paper fill indicator located on the paper guides.

Overfilling may cause paper jams.

•

Load paper, transparencies, and card stock with the

recommended printable side faceup and the top edge entering

the printer first. For more information on loading

transparencies, see the packaging that the transparencies came

in.

Note: When loading A6‑size paper, make sure the

multipurpose feeder extender rests lightly against the edge

of the paper so that the last few sheets of paper remain in

place.

•

Load letterhead faceup with the top edge entering the printer

first. For two‑sided (duplex) printing, load letterhead facedown

with the bottom edge entering the printer first.

•

Load envelopes with the flap on the left side facedown.

Warning—Potential Damage: Never use envelopes with

stamps, clasps, snaps, windows, coated linings, or self‑stick

adhesives. These envelopes may severely damage the

printer.

From the printer control panel, set the paper size and paper type

in the Paper menu to match the paper or specialty media loaded

in the multipurpose feeder.