Gardena Profi C 1060 Instrukcja obsługi - Strona 13
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt do trawników i ogrodów Gardena Profi C 1060. Gardena Profi C 1060 18 stron. Water computer
Również dla Gardena Profi C 1060: Instrukcja obsługi (16 strony)
Drukuj stronę
Fault
Possible Cause
Watering program is not
Valve was opened manually
being undertaken
previously.
(no watering)
Tap turned off.
Program overlap
st
(1
watering start time has
priority).
Soil moisture or rain sensor
reports sufficient moisture.
Batt. indicator flashes because
battery is almost flat.
Water Computer does
Minimum quantity of water
not close
drawn is less than 20 l / h.
If you have any other problems with your Water Computer, please contact GARDENA Service.
24
Remedy
v Avoid possible program
overlaps.
v Turn on tap.
v Enter new watering
program without overlaps.
v If dry, check setting /
location of soil moisture /
rain sensor.
v Insert new (alkaline) battery
v Connect more drip heads
9. Putting Your Water Computer out of Operation
1. Press Menu-key 3 times, select Prog. Off with the ▲-key
Over-wintering /
and confirm with the O.K.-key.
storage :
The watering programs are deleted.
2. Store your Water Computer in a dry place where it is protected
from frost.
Please return flat batteries to a GARDENA dealer or dispose
of them properly at your nearest recycling centre. Only dispose
of batteries when they are flat.
10. Accessories
Automatic control with :
GARDENA Soil Moisture Sensor
GARDENA Rain Sensor electronic
GARDENA Automatic Water Distributor
Art. No. 1187
Art. No. 1189
Art. No. 1198
25