Cosco CEB TRIM-280 Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Trenażer eliptyczny Cosco CEB TRIM-280. Cosco CEB TRIM-280 15 stron. Magnet power,elliptical bike

Drukuj stronę

Attention:

Please follow these assembly instructions step by step to assemble this elliptical.

1. Install the Rear Stabilizer

Attach the stabilizer (2) to the Main frame (1) with two

M10X70 Bolts (83), ф10

washers (46), and Cap nut (84). (Refer figure 1)

2. Install the Front Stabilizer

Attach the stabilizer (2) to the Main Frame (1) with two

ф10 Spring washer （ 15）、

M10X70 Bolts (83),

washers (46), and Cap nut (84). (Refer figure 2)

3. Install the Front Upright Frame

Put the end of resistance cable into the spring hook of

Tension control wire (12) as shown on drawing A of

figure 3

Pull the resistance cable up and force it into the gap of

metal bracket of Tension control wire (12) as shown on

drawing B of figure3

Connect the resistance cable with the Tension control wire (12) completed as shown on

drawing C of figure 3

Connect the computer wire (26) to the Sensor wire (25) coming out from mainframe (1).

Insert the Front upright frame (14) to the main frame (1) and secure it with six pcs of Bolts

(38), Spring washers (51), and Arc washers (45) as shown on drawing D of figure 3.

4. Install the Hand Pulse Bar

Spring washer （ 15）、

ф10 Flat