Makita 6010BVR Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wiertarka Makita 6010BVR. Makita 6010BVR 8 stron.
Również dla Makita 6010BVR: Instrukcja obsługi (16 strony)

Drukuj stronę

1. Maintenance

FUNCTIONAL

DESCRIPTION

1. Switch trigger

2. Lock button

1. Low

2. High

3. Speed control screw

4. Switch trigger

5. Lock button

1. Reversing switch lever

CAUTION:

•

Always be sure that the tool is switched off and unplugged before

adjusting or checking function on the tool.

Switch action

•

005102

CAUTION:

•

Before plugging in the tool, always check to see that the switch trigger

actuates properly and returns to the "OFF" position when released.

For 6010B

To start the tool, simply pull the switch trigger. Release the switch trigger to

stop.

For continuous operation, pull the switch trigger and then push in the lock but-

ton.

To stop the tool from the locked position, pull the switch trigger fully, then

release it.

For 6010BVR

004621

To start the tool, simply pull the switch trigger. Tool speed is increased by

increasing pressure on the switch trigger. Release the switch trigger to stop.

For continuous operation, pull the switch trigger and then push in the lock but-

ton.

To stop the tool from the locked position, pull the switch trigger fully, then

release it.

A speed control screw is provided so that maximum tool speed can be limited

(variable).

Turn the speed control screw clockwise for higher speed, and counterclock-

wise for lower speed.

Reversing switch action

004628

For 6010BVR

This tool has a reversing switch to change the rotational direction. Move the

reversing switch lever to the

position for counterclockwise (reverse) rotation.

CAUTION:

•

Always check the rotational direction before operation.

•

Use the reversing switch only after the tool comes to a complete stop. It

will damage the tool to change the rotational direction before the tool

stops.

position for clockwise (forward) rotation or the