Gardena 8808 Instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Elektronarzędzie Gardena 8808. Gardena 8808 11 stron. Edging accu shears /accu shrub shears
Drukuj stronę3. Assembly
Fitting / Removing the
Telescopic Swivel Handle :
1
4. Initial Operation
Charging the Accu :
4
5
5. Operating Your Edging Accu Shears
WARNING !
Risk of Injury !
12
The GARDENA Telescopic Swivel Handle Art. No. 8806
(available as an accessory) can be mounted in 45° steps
from 90° to -90°.
Fitting the Telescopic Swivel Handle :
v Guide the swivel handle
holder of the Accu Shears until the lock engages.
Teleskopdrehstiel demontieren :
v Press the release button
2
The starting lockout and ON button on the Accu Shears no
longer function when the swivel handle is mounted.
The Accus must be charged for 20 hours before using the Accu
Shears.
The accus discharge themselves when stored for a longer period
of time. Therefore, the Shears should be recharged in a dry place
before each operation.
Over-voltage damages accus.
A
V Ensure the mains voltage is correct.
3
1. Insert charging cable
Accu Shears.
2. Plug charging unit into a mains socket.Accu Shears.
The charging indicator lamp
3. Unplug the Accu Shears from the mains after 20 hours.
Even when the Accu is completely charged the charging indica-
5
tor lamp
recharge your shears immedia-tely to prevent the cells from
becoming completely empty.
There is a risk of injury if the switching devices installed
on the Shears are removed or bridged (e.g. by fastening
the on switch to the handle).
This prevents the Accu Shears switching off automatically.
V Never remove or bridge the switching devices.
The starting lockout prevents your GARDENA Edging Accu Shears
from being switched on unintentionally.
1
at the desired angle into the handle
2
and pull out the swivel handle.
3
into charging socket
5
comes on.
continues to show. When the cutting power drops,
4
of the Edging