Makita 6076DW Instrukcja obsługi - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wiertarka Makita 6076DW. Makita 6076DW 14 stron. 10 mm (3/8”) cordless drill equipped with keyless chuck and electric brake
Drukuj stronę
Charging
Connect the charging plug to
the
charging
connector,
then
plug
in
the charger to the
power receptacle. Charging takes 3 hours.
CAUTION:
* T h e battery in your
n e w
tool
is
not fully
charged. You will need to charge it before
use.
Do
not operate the tool during charging.
Overcharging more than
2
days consider-
ably s h o r t e n s t h e battery service life.
Always unplug the charger after completing
the charge.
Charging plug
Installing or removing driver bit or drill bit
CAUTION :
Always set the reversing switch lever to the neutral position before installing or removing
the bit.
Hold the
ring and t u r n the sleeve counter-
clockwise t o open the chuck jaws. Place
the bit in the chuck as far as it will go.
Hold the ring firmly and t u r n the sleeve
clockwise t o tighten the chuck.
To remove the bit, hold the ring and t u r n
the sleeve counterclockwise.
Sleeve
Ring
6