Avaya IP KEM Podręcznik użytkownika - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Telefon Avaya IP KEM. Avaya IP KEM 13 stron. Ip key expansion module (kem)

Drukuj stronę
Avaya IP KEM Podręcznik użytkownika
6
About the Key Expansion Module
Press the Avaya IP Deskphone KEM and IP Phone firmly together until the Avaya
3
IP Deskphone KEM locks into place.
If connecting a second Avaya IP Deskphone KEM, repeat steps 1-3.
4
The second Avaya IP Deskphone KEM is attached to the right side of the first Avaya IP
5
Deskphone KEM.
Attach the IP Phone stand and the Avaya IP Deskphone KEM stand, if removed.
6
Adjust each Avaya IP Deskphone KEM stand to the same angle as the IP Phone.
The Avaya IP Deskphone KEM powers up.
7
The Avaya IP Deskphone KEM uses the electrical connection of the Avaya 2002
8
IP Deskphone or Avaya 2004 IP Deskphone for power. It does not have its own power source.

Using the wall-mount option

The IP Phone and IP Phone KEM combination can be wall-mounted using the optional bracket kit
provided. The second Avaya IP Deskphone KEM is attached to the right side of the first Avaya
Avaya IP Deskphone KEM.

Adjusting the tilt base

The tilt base for the Avaya 2002 IP Deskphone cannot be adjusted; however, the tilt base on the
Avaya IP Deskphone KEM can be adjusted to match the fixed angle of the Avaya 2002
IP Deskphone.
The Avaya 2004 IP Deskphone has an adjustable tilt base. Adjust the tilt of both the Avaya 2004
IP Deskphone and the Avaya IP Deskphone KEM as desired.

Initializing the KEM

Once the IP Phone KEM has been installed and powered up on your Avaya 2002 IP Deskphone
2002 or 2004, the IP Phone KEM initializes. When this occurs, the Avaya IP Deskphone KEM
display lights up and flashes until it establishes communication with the IP Phone. When
initialization completes successfully, the additional programmable keys on the Avaya IP
Deskphone KEM are ready to use.
When you power up both the IP Phone and the IP Phone KEM together, the IP Phone will boot up
first. A tone will sound to indicate that the IP Phone has initialized successfully. The labels will
display on the IP Phone KEM to indicate that it has initialized successfully.
Note: If the IP Phone KEM display does not stop flashing or does not display key labels,
contact your system administrator.
NN40050-103
NN40050-103