Makita 6176D Instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wiertarka Makita 6176D. Makita 6176D 17 stron. Makita cordless driver drill instructions manual 6176d
Również dla Makita 6176D: Instrukcja obsługi (17 strony), Lista części (1 strony)
Drukuj stronę
FUNCTIONAL
DESCRIPTION
1
1. Charging plug
1
1. Switch trigger
1
1. Reversing switch lever
CAUTION:
•
Always be sure that the tool is switched off before
adjusting or checking function on the tool.
Charging
002059
Connect the charging plug to the charging connector, then
plug in the charger to the power receptacle. Charging takes 3
hours.
CAUTION:
•
The battery in your new tool is not fully charged. You will
need to charge it before use.
•
Do not operate the tool during charging.
•
Overcharging more than 2 days considerably shortens
the battery service life.
Always unplug the charger after completing the charge.
Switch action
002268
To start the tool, simply pull the switch trigger. Tool speed is
increased by increasing pressure on the switch trigger.
Release the switch trigger to stop.
Reversing switch action
002074
This tool has a reversing switch to change the direction of
rotation. Move the reversing switch lever to the "FWD" posi-
tion for clockwise rotation or the "REV" position for counter-
clockwise rotation.
When the reversing switch lever is in the neutral position, the
switch trigger cannot be pulled.
CAUTION:
•
Always check the direction of rotation before operation.
•
Use the reversing switch only after the tool comes to a
complete stop. Changing the direction of rotation before
the tool stops may damage the tool.
•
When not operating the tool, always set the reversing
switch lever to the neutral position.
7