Makita 6216DWAE Instrukcja obsługi - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wiertarka Makita 6216DWAE. Makita 6216DWAE 20 stron.

MAINTENANCE

CAUTIO N:

Always be sure that the tool is switched off and the battery cartridge is removed before

attempting to perform inspection or maintenance.

Replacing carbon brushes

Remove and check the carbon brushes

regularly. Replace when they wear down to

the limit mark. Keep the carbon brushes

clean and free to slip in the holders. Both

carbon brushes should be replaced at

the same time. Use only identical carbon

brushes.

Use a screwdriver to remove the brush

holder caps. Take out the worn carbon

brushes, insert the new ones and secure

the brush holder caps.

Limit

mark

Brush holder cap

To maintain product SAFETY and RELIABILITY, repairs, maintenance or adjustment should

be performed by Makita Authorized

Factory Service Centers, always using Makita

replacement parts.

' . "

Recycling the Battery

The

only

way to dispose of a Makita battery is

to recycle it. The law prohibits any other

method of disposal.

Ni-Cd

To recycle the battery:

1. Remove the battery from the

tool.

2. a). Take the battery to your nearest Makita Factory Service Center

b). Take the battery to your nearest Makita Authorized Service Center or

Distributor that has been designated as a Makita battery recycling location.

Call your nearest Makita Service Center or Distributor to determine the location

that provides Makita battery recycling. See your local Yellow Pages under

' 'Tools-Electric'