Makita 6227DW Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wiertarka Makita 6227DW. Makita 6227DW 19 stron. 9.6 v i2 v 14.4 v
Również dla Makita 6227DW: Instrukcja obsługi (19 strony), Instrukcja obsługi (19 strony), Instrukcja obsługi (19 strony)

Drukuj stronę

Tool

U s e

and Care

12.

Use clamps or other practical way t o secure and support the workpiece t o

a stable platform. Holding the work by hand or against your body is unstable

and may lead t o loss of control.

13. Do not force tool. Use the correct tool for your application. The correct tool

will do the job better and safer at the rate for which

is designed.

14. Do not use tool if switch does not turn

it on

or off. A tool that cannot be

controlled with the switch is dangerous and must be repaired.

15. Disconnect battery pack from tool or place the switch in the locked or off

position before making any adjustments, changing accessories, or storing

the tool. Such preventive safety measures reduce the risk of starting the tool

accidentally.

16. Store idle tools out of reach of children and other untrained persons. Tools

are dangerous in the hands of untrained users.

17. When battery pack is not in use, keep it away from other metal objects like:

paper clips, coins, keys, nails, screws, or other small metal objects that can

make a connection from one terminal t o another. Shorting the battery

terminals together may cause sparks, burns, or a fire.

18. Maintain tools w i t h care. Keep cutting tools sharp and clean. Properly

maintained tools with sharp cutting edge are less likely t o bind and are easier

t o control.

19. Check for misalignment or binding of moving parts, breakage of parts, and

any other condition that may affect the tool's operation. If damaged, have

the tool serviced before using. Many accidents are caused by poorly

maintained tools.

20. Use only accessories that are recommended by the manufacturer for your

model. Accessories that may be suitable for one tool may create a risk of injury

when used on another tool.

Service

21. Tool

service must be performed only by qualified repair personnel. Service

or maintenance performed by unqualified personnel may result in a risk of injury.

22. When servicing a tool, use only identical replacement parts. Follow

instructions in the Maintenance section of this manual. Use of unauthorized

parts or failure t o follow Maintenance Instructions may create a risk of shock

or injury.