Fronius TPS 270i C Skrócona instrukcja obsługi
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla System spawania Fronius TPS 270i C. Fronius TPS 270i C 2 stron.
Drukuj stronę
/ Perfect Welding
/ Solar Energy / Perfect Charging
TPS 270i C
Quick Guide
SAFETY
Before working with the device, ensure that you have read and understood all the documents provided in hard copy and online.
This document only describes the most important functions of the device. For a complete description of the device, refer to the Operating Instructions.
1 Set the filler metal and shielding gas
- Open the material
- Turn and press to
4
Set the welding power
Sheet thickness
Welding current
Wire speed
Special function F1
- select desired parameter
- set desired parameter
Status indicators:
(light up when the
respective function is
active)
42,0426,0248,EN
002-16082017
2 Set the welding process
selection
enable the desired
settings
5
Adjust the parameters for correction
Arc length stabilizer
Penetration stabilizer
2 Set the operating mode
- Press to select the desired
welding process
Text display:
- Activate / deactivate = press left adjusting dial
Arc length correction
- Scroll through full text = turn left adjusting dial
Welding voltage
Pulse/dynamic correc-
Abbreviation
tion
Special function F1
- select desired parameter
- set desired parameter
Spatter Free Ignition
SynchroPulse
Voltage Reduction Device
- Press to select the desired
mode
Full text
Operating Instructions:
www.fronius.com/tpsi-manuals