Fronius TPS 5000 Instrukcja instalacji - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla System spawania Fronius TPS 5000. Fronius TPS 5000 20 stron. Second earthing socket at rear
Również dla Fronius TPS 5000: Instrukcja instalacji (20 strony)

Drukuj stronę

Removing the hexagon head screw, width = 19

Removing the hexagon nut, width = 32

Mounting the current-socket blanking caps

Re-mounting the front current socket

(9)

(e)

(9)

(e)

Remove the front current socket:

Undo the hexagon head screw

(c)with the n°19 flat spanner

Remove the hexagon head

screw

(c)

Remove along with the screw:

belleville spring washer

socket star

the existing current cable

Undo the hexagon nut (d) with the

reversible ratchet (C) and the "so-

cket for socket wrench, width 32

Remove the hexagon nut

Remove insulating washer

Pull out the front (-) current so-

cket towards the front

(d)

Mount the current-socket blanking

caps (9):

onto the front (-) current so-

cket that you removed in Step

b) onto the current socket contai-

ned in the installation kit

The recess (e) must point downwards.

Mount the front (-) current-socket,

complete with its blanking cap:

Insert the front (-) current-so-

cket, working from the outside

towards the inside

Insert insulating washer

Screw on the hexagonal nut

Tighten the hexagonal nut with

the torque wrench and the "so-

cket for socket wrench, width

32"

Thightening torque 35 Nm

IMPORTANT! The current-socket re-

cess (e) must point downwards.