Broadcom 9400-8i Podręcznik dla początkujących
Przeglądaj online lub pobierz pdf Podręcznik dla początkujących dla Karta PCI Broadcom 9400-8i. Broadcom 9400-8i 2 stron. Pcie storage adapter
Drukuj stronę
Getting Started Guide
Broadcom PCIe Storage Adapter
Thank you for purchasing the
Broadcom PCIe Storage Adapter.
Please take a few minutes to read
this quick installation guide before
you install the adapter.
ATTENTION:
Perform all installation work at
an electrostatic discharge (ESD)-
safe workstation that meets the
requirements of EIA-625,
Requirements for Handling
Electrostatic Discharge Sensitive
. You must perform all
Devices
actions in accordance to the
latest revision of the IPC-A-610
ESD-recommended practices.
5972-4867-P0
Hardware Installation Instructions
CAUTION: Disconnect the computer from the power supply and from any networks to which you
will install the adapter, or you risk damaging the system or experiencing electrical
shock.
ATTENTION:
To avoid the risk of data loss, back up your data before you change your system
configuration.
To install the Broadcom PCIe storage adapter, follow these steps.
1.
Unpack the adapter, and inspect it for damage. Unpack the adapter in a static-free environment.
Remove the adapter from the anti-static bag, and carefully inspect the device for damage. If you notice
any damage, contact Broadcom or your reseller sales and support representative.
2.
Prepare the computer. Turn off the computer, and disconnect the power cord from the rear of the
power supply. Remove the cover from the chassis.
Insert the adapter into an available PCIe slot. Locate an empty PCIe slot adequate for your
3.
board. Align the adapter to a PCIe slot. Press down gently, but firmly, to seat the adapter correctly in the
slot.
Connect the appropriate cables between the adapter and the backplane or storage devices.
4.
CAUTION: For NVMe connections to a SFF-8639 (U.2) bay
user guide for more information on connecting to NVMe drives.
5.
Make sure the system provides the required airflow for the adapter.
PCIe Adapter
9460-16i
9460-8i
9480-8i8e
9440-8i
9400-16i
9400-8i
9400-16e
9400-8e
Complete installation instructions, including instructions on how to change the bracket, can be found at
this address: https://www.broadcom.com/support/download-search. Refer to the Quick Installation
Guide and the User Guide.
Driver Installation
The firmware and drivers are routinely updated and made available on the Support and Download
center. Please visit
https://www.broadcom.com/support/download-search
firmware and driver for the adapter.
orwarded on the proper pins. Improperly connecting a
SFF-8639 bay could damage the PCIe st
Quick Installation Guide and the cable configurations
Airflow
Inlet Temperature
250 LFM
250 LFM
250 LFM
200 LFM
200 LFM
200 LFM
200 LFM
200 LFM
and download the latest
use
ge adapter and
55°C
55°C
55°C
55°C
55°C
55°C
55°C
55°C