Fronius TransPocket 180/np Procedura aktualizacji - Strona 2

Przeglądaj online lub pobierz pdf Procedura aktualizacji dla System spawania Fronius TransPocket 180/np. Fronius TransPocket 180/np 7 stron.

5) After downloading the file, you have to unzip the ZIP file in a new folder

(ATTENTION all files need to be extracted in the same folder)

Short description what is included in the ZIP file (1.5.4_ServiceTool2_incl_CDM.zip)

(1) 1.5.4_Service.zip is including the folders of the different types of the TransPocket

(2) 1.5.4_ServiceTool2_incl_CDM.zip is the latest version of the ServiceTool Zip file (incl. Driver)

(3) CDM v2.12.28 WHQL Certified.zip is including the Driver for the connection with the cable

(4) TpServiceTool2_V2.exe is the Program for the Update

Start the application with a double-click on the file „TpServiceTool2_V2.exe

09/2018

4) Connect the USB plug to the Laptop

It could be that you can´t get a connection with that cable, although the plug is

inside the USB port. In this case, you have to install the USB driver (CDM included

in the ZIP file)

Disconnet ALL other cables (power supply, mains plug, other USB cables)

 Reason: there should be no earth connection, because too high voltages can

occur on the USB connection

2/7