Makita 6312DW Instrukcja obsługi - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wiertarka Makita 6312DW. Makita 6312DW 16 stron. Cordless driver drill equipped with electric brake
Drukuj stronę
Switch action
Tool speed is increased by increasing pres-
sure on the trigger. To s t a r t the tool, simply
pull the trigger. Release the trigger to stop.
S w i t c h trigger
qy
' v i
1
CAUTION :
Before inserting the battery cartridge into the tool, always check t o see that the switch
trigger actuates properly and returns to the
"OFF"
position when released.
Reversing switch action
This tool has a reversing switch t o change
the direction of rotation. Slide the revers-
ing switch to the left for clockwise rota-
tion or to the right for counterclockwise.
Reversing switch
11
\ \
CAUTION :
.Always check the direction of rotation before operation.
*Move the reversing switch only after the tool comes to a complete stop. Changing the
direction of rotation before the tool stops may damage the tool.
Speed change
To change the speed, slide the speed change
lever
t o
the "H"
side for high speed
or
"L" side for low speed.
To slide the
speed change lever easily, pull the trigger
slightly while pushing the speed change
lever. Be sure that the speed change lever
i s s e t to the correct position before opera-
tion. Use the right speed for your job.
CAUTION :
Always set the speed change lever fully into the correct position. If you operate the tool
with the speed change lever positioned halfways between the "H" side and
"L"
side, the
tool may be damaged.
9