Alicn Medical AET-R161 Podręcznik - Strona 3

Przeglądaj online lub pobierz pdf Podręcznik dla Termometr Alicn Medical AET-R161. Alicn Medical AET-R161 9 stron. Non-contact infrared thermometer

Alicn Medical (Shenzhen), Inc.

Load and replace the battery

When the low voltage symbol

showed as

follows:

Press the cover of the battery, and push it down, then the battery cover is pushed away

Place two

AAA

batteries according to the current negative pole

Close the battery cover

Before measuring, you need to notice:

1. Recommend try it out before formal measurement, so as to operation this thermometer

familiarly.

2. Don't expose the thermometer to temperature extremes

or humidity extremes (below 15%RH or over 95%RH).Please place the thermometer in the

temperature

range 16℃~35℃ at least rest 30 minutes before start measuring,

may cause inaccuracy

3. Don' t use the thermometer under temperature extremes (below

100℃/212℉)

or humidity extremes (below 15%RH or over 85%RH )

4. The user should stay indoors at least 20 minutes to

5. After

strenuous exercise ,rest at least 30 minutes before taking the measurement

6. Better repeat the measurement at least twice In order to get the most accurate temperature, and

please remove the probe and wait at least 5 seconds before repeat the measurement,

do may cause inaccuracy

Normal body temperature

know about your healthy temperature .

Clean the infrared sensor with a soft cloth moistened with some clinical alcohol in a gentle

manner after every measurement, failing to do may cause inaccuracy

9. Don't touch or blow infrared sensor, or may cause inaccuracy

10. This product is taken to measure human body temperature by measuring the forehead

temperature

11. During the measurement, move the temperature away immediately after hear a "beep", or may

is flashing, replace the battery immediately. The steps

is about 35.5℃～37.8℃, regular temperature measurement help to

(below-20℃/4℉, or over 50℃/122℉)

balance the body temperature

failing to do

0℃/32℉

or over

failing to