Garmin 010-02235-00 Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla GPS Garmin 010-02235-00. Garmin 010-02235-00 26 stron.

Drukuj stronę

Open the Garmin Explore app.

Changes made to data such as collections, waypoints,

routes, and tracks update automatically.

You can now sync your data to your GPSMAP 86 device.

Using the Main Pages

The information needed to operate this device is found on the

main menu, map, compass, trip computer, and altimeter pages.

Select PAGE or QUIT to scroll through the main pages.

Opening the Main Menu

The main menu gives you access to tools and setup screens for

waypoints, activities, routes, and more

page

Setup Menu, page

From any page, select MENU twice.

Map

represents your location on the map. As you travel,

and displays your path. Waypoint names and symbols appear

on the map. When you are navigating to a destination, your

route is marked with a colored line on the map.

Changing the Map Orientation

From the map, select MENU.

Select Map Setup > Orientation.

Select an option:

• Select North Up to show north at the top of the page.

• Select Track Up to show your current direction of travel at

the top of the page.

• Select Automotive Mode to show an automotive

perspective with the direction of travel at the top.

Measuring Distance on the Map

You can measure the distance between multiple locations.

From the map, move the cursor to a location.

Select MENU > Measure Distance.

Select additional locations on the map.

Map Page Settings

From the map, select MENU.

Stop Navigation: Stops navigating the current route.

Map Setup: Enables you to open additional map settings

Settings, page

4).

Measure Distance: Allows you to measure the distance

between multiple locations

page

4).

Restore Defaults: Restores the map to factory default settings.

Map Settings

From the map, select MENU, and select Map Setup.

Configure Maps: Enables or disables the maps currently

loaded on the device.

Orientation: Adjusts how the map is shown on the page. The

North Up option shows north at the top of the page. The

Track Up option shows your current direction of travel toward

the top of the page. The Automotive Mode option shows an

automotive perspective with the direction of travel at the top.

Dashboard: Sets a dashboard to display on the map. Each

dashboard shows different information about your route or

your location.

Guidance Text: Sets when the guidance text is shown on the

map.

Advanced Setup: Enables you to open advanced map settings

(Advanced Map Settings, page

(Main Menu Tools,

12).

(Measuring Distance on the Map,

4).

Advanced Map Settings

From the map, select MENU, and select Map Setup >

Advanced Setup.

Auto Zoom: Automatically selects the appropriate zoom level

for optimal use on your map. When Off is selected, you must

zoom in or out manually.

Detail: Selects the amount of detail shown on the map. Showing

more detail may cause the map to redraw more slowly.

Shaded Relief: Shows detail relief on the map (if available) or

turns off shading.

Vehicle: Sets the position icon, which represents your position

on the map. The default icon is a small blue triangle.

Zoom Levels: Adjusts the zoom level at which map items

appear. The map items do not appear when the map zoom

level is higher than the selected level.

Text Size: Selects the text size for map items.

Compass

When navigating,

moves

direction you are moving. When

electronic compass, you are traveling directly toward your

destination. If

toward the top of the compass.

Using the Compass

You can use the compass to navigate an active route.

Select PAGE.

Hold the device level.

to your destination.

Course Pointer

The course pointer is most useful when you are navigating on

water or where there are no major obstacles in your path. It can

also help you avoid hazards near the course, such as shoals or

submerged rocks.

To enable the course pointer, from the compass, select MENU >

Setup Heading > Go To Line (Pointer) > Course (CDI).

(Map

The course pointer

line leading to the destination. The course deviation indicator

(CDI)

provides the indication of drift (right or left) from the

course. The scale

the course deviation indicator, which tell you how far off course

you are.

Navigating with Sight 'N Go

You can point the device at an object in the distance, lock in the

direction, and navigate to the object.

Select Sight 'N Go.

Point the device at an object.

Select Lock Direction > Set Course.

Navigate using the compass.

Compass Settings

From the compass, select MENU.

Sight 'N Go: Allows you to point the device at an object in the

distance, and navigate using the object as a reference point

(Navigating with Sight 'N Go, page

points to your destination, regardless of the

points toward the top of the

points any other direction, turn until it points

indicates your relationship to the course

refers to the distance between dots

4).

Using the Main Pages