Garmin 010-C0627-00 - MapSource BlueChart g2 Podręcznik użytkownika - Strona 9

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla GPS Garmin 010-C0627-00 - MapSource BlueChart g2. Garmin 010-C0627-00 - MapSource BlueChart g2 15 stron. Software de mapeamento
Również dla Garmin 010-C0627-00 - MapSource BlueChart g2: Podręcznik użytkownika (24 strony), Instrukcja obsługi (2 strony), Podręcznik użytkownika (30 strony), Podręcznik użytkownika (28 strony), (portugalski) Instrukcja obsługi (30 strony)

Installation

Installing the Device Drivers

The required driver ﬁ les which the USB Data Card

Programmer needs to ﬁ nd on either the USB Data

Card Programmer CD, the City Navigator CD, or the

MapSource Setup CD are:

grmn0200.inf

grmn0200.sys

grmn1200.sys

If these ﬁ les cannot be seen in the root directory on the

CD using Windows Explorer, your View settings may

need to be adjusted.

7. When installation is complete a window will display that shows

the device name (Garmin USB Data Card Programmer) and states

the driver installation is ﬁ nished. Click on "Finish".

8. A ﬁ nal window will appear telling you that operating software for

the Card Programmer is being installed.

9. To make sure the USB Programmer has been successfully installed:

From the Control Panel, click on "System", then the "Device

Manager" tab, then click the + by "Universal serial bus control-

ler". You should see "Garmin USB Data Card Programmer" on the

list. Another method would be to open the MapSource program,

click the 'Save To Device' icon, then the 'USB Port' tab. You should

see "Card Programmer" listed in the "Save Maps To:" window.

If you see a yellow '!' mark in front of the device name, (install)

appears at the end of the Programmer name or the Programmer

appears under "Other Devices" as an unknown device, follow these

alternate steps to install the Programmer:

1. Double-click the My Computer icon from your Desktop. For Win-

dows 98, click "View", "Folder Options", then the "View" tab.

For Windows 2000/ME, click "Tools", "Folder Options", then the

"View" tab.

2. Make note of the following changes if you wish to change your

View settings back after installing the Programmer. Change the

Hidden Files selection to "Show All Files" or "Show hidden ﬁ les

and folders" and uncheck the "Hide ﬁ le extensions for known

ﬁ le types" or "Hide protected operating system ﬁ les", then click

"OK".

3. Be sure the driver CD is inserted and the USB Programmer is

plugged into the PC. Open the Control Panel. For Windows 98,

click on "System", then the "Device Manager" tab. For Windows

2000/ME, click the "Hardware" tab, then click "Device Manager".