AEG BCK45622YM Podręcznik użytkownika - Strona 33
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Piekarnik AEG BCK45622YM. AEG BCK45622YM 36 stron.
Drukuj stronę
Problem
The display shows F11.
There is no good cooking
performance using the True
Fan Cooking PLUS function.
There is no good cooking
performance using the True
Fan Cooking PLUS function.
There is no good cooking
performance using the True
Fan Cooking PLUS function.
You want to activate the
True Fan Cooking function,
but the indicator of the Plus
Steam button is on.
The water in the cavity em-
bossment does not boil.
The water comes out of the
cavity embossment.
11.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
Possible cause
The plug of the core tem-
perature sensor is not cor-
rectly installed into the sock-
et.
You did not activate the
True Fan Cooking PLUS
function.
You did not fill the cavity
embossment with water.
You did not activate correct-
ly the True Fan Cooking
PLUS function with the Plus
Steam button.
The True Fan Cooking PLUS
function operates.
The temperature is too low.
There is too much water in
the cavity embossment.
on the front frame of the appliance
cavity. Do not remove the rating plate
from the appliance cavity.
.........................................
.........................................
.........................................
ENGLISH
Remedy
Put the plug of the core tem-
perature sensor as far as
possible into the socket.
Refer to "Activating the True
Fan Cooking PLUS func-
tion".
Refer to "Activating the True
Fan Cooking PLUS func-
tion".
Refer to "Activating the True
Fan Cooking PLUS func-
tion".
Push the Plus Steam button
to stop the True Fan
Cooking PLUS function.
Set the temperature at least
to 110 °C.
Refer to "Hints and tips"
chapter.
Deactivate the oven and
make sure that the appliance
is cold. Wipe the water with
a cloth or sponge. Add the
correct amount of water to
the cavity embossment. Re-
fer to the specific procedure.
33