AC Infinity AC-RBF4-W Podręcznik użytkownika - Strona 7
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Wentylator AC Infinity AC-RBF4-W. AC Infinity AC-RBF4-W 11 stron. Airtap series. register booster fan system. bronze/white
Drukuj stronę
PROGRAMMING
1. MODE BUTTON
2. UP / DOWN BUTTON
Cycles through the unit's
The up and down buttons
modes: temperature display,
change the setting temper-
cooling trigger, heat trigger,
ature, or the speed
and fan speed.
of the fan.
3
1
4. COOLING TRIGGER
5. HEATING TRIGGER
This allows you to set a
This allows you to set a
temperature trigger for the
temperature trigger for the
fan to run when your air
fan to run when your central
conditioner system is on.
heating system is on.
12
3. TEMPERATURE DISPLAY
This is the default mode
that shows the current
temperature the probe is
measuring.
4
5
6
2
6. FAN SPEED
This allows you to set a max
speed the fan can reach
when the cooling or heating
triggers the fan to run.
PROGRAMMING
TEMPERATURE DISPLAY
This is the default mode that shows the current temperature the probe is
measuring. After setting up the cooling and heating triggers, it is ideal to
return to this mode to be able to actively monitor the vent's temperature.
The temperature triggers and the fan speed you set in the other models
will still operate in the background.
COOLING TRIGGER
This allows you to set a temperature trigger for the fan to run when your
air conditioner system is on. In this mode, you can set a temperature
that will trigger the fan to run when the probe temperature meets or
falls below the set temperature. And trigger OFF when the probe
temperature is above the set temperature. To minimize noise and power
consumption, we designed is so that the fan speed will slowly ramp up
towards the set fan speed or slowly ramp down to turn off. While In this
mode, you can press up or down to change the set temperature. You can
hold the MODE button simultaneously for 2 or more seconds to turn this
trigger off, in which the display will show "OF".
If the fan is not running when it should be, you may need to raise the set
temperature. If the fan is running when it shouldn't be, you may need to
lower the set temperature.
After setting the temperature triggers and fan speed, it is recommended
to return to the temperature display mode. You can do this by pressing
the MODE button to cycle through the modes until you reach the
temperature display mode.
13