alion AHC15D Skrócona instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Timer alion AHC15D. alion AHC15D 3 stron.

Drukuj stronę
finished the program setting, press "MANUAL" ,the bottom of screen will show tge "ON AUTO" or "AUTO OFF"
3. after finishing setting, please press "
as following setting steps if you need to modify procedures。
Step
1
Press
Press H+ or M+
2
MANUAL"
(or
Press the"
Press D+
3
(if it is same every day, do not press the key)
4
Press
Press H+ or M+
5
(or
Press the"
MANUAL"
Press D+
6
(if it is same every day, do not press the key)
Repeat step 2-6
7
Or press 
 Summer display time setting：
Step
Key
Press H+ & M+
setting
cancel
Press H+ & M+ again
Description：
This setting is only to set displayed present time, but not change time of switch program that has been set. if program switch ne
eds to run according to DST, please set it in setting program of program groups.
 Countdown: "d" display at bottom left corner of LCD
Step
Key
1
Press
&
2
press
& H+ or
3
Press MANUAL
4
Press
5
Press
&
 Auto time error correction day: "1d"display at bottom-left corner of LCD(setting range -3~3sec)
Step
Key
1
Press
& MANUAL
2
Press D+
3
Press
Manual control on and off
LCD Display
ON AUTO
AUTO OFF
ON
OFF
 Check accumulated working time and action times
When you want to know equipment running time and action times , press" " and "Manual" ,and the screen will display working
time (h) and times (P) circularly. And multiply the display number by 10 to get the real time and times.(max:99990 & 99990t)
For example: "h0013" and "p0021" .accumulated working time is 130 hours and action times is 210 times.
", then you can check the groups and times of setting switch when, or please modify
Key
key to clear the time)
key to clear the time)
The present time increase 1 hour("1h" display of bottom- left corner LCD )
Summer time cancel , go back the present time.
Countdown setting
Setting countdown
& M+
Start count down
Return to start countdown
Exit
LCD display：1d 00
Setting 3 seconds ~ -3 seconds， 0.5 seconds to add
Confirm
（Cycle to press "MANUAL"）
Automatic on/off state, it is on now
Automatic on/off state, it is off now
Always on
Always off
Enter into regular ON setting(display 1 ON)
Set ON Hour or Minutes
Setting: Every day, MO-FR, MO-SA, SA-SU, MO-WE, TH-SA, MO
WE FR, TU TH SA
Into setting timer OFF(displays 1 OFF)
Set OFF Hour or Minutes
Setting: Every day, MO-FR, MO-SA, SA-SU, MO-WE, TH-SA, MO
WE FR, TU TH SA
Set 2
-20th ON/OFF time
nd
Exit the program settings
Programming
Programming
minutes and seconds
Programming
Work state
Programming
（Range：1sec~99min59sec）