Aliph Jawbone Podręcznik użytkownika - Strona 7

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Słuchawki Aliph Jawbone. Aliph Jawbone 18 stron. Aliph jawbone: user guide

3. Pairing Jawbone

Jawbone works with Bluetooth-enabled devices

only. Prior to pairing your headset for the first time,

please ensure that your mobile phone is Bluetooth

capable and the Bluetooth feature is enabled.

The first time that you use Jawbone with your Blue-

tooth-enabled phone, you will have to "pair" them to-

gether. This is a procedure that exchanges informa-

tion between your phone and the Jawbone so that

they can work together. Pairing is only required the

first time you use the Jawbone with your phone. The

headset pairing procedure will vary depending on

the model of your mobile phone. Please refer to your

mobile phone user guide for pairing instructions.

NOTE: Instructions on how to pair Bluetooth devices with

many popular phones can be found on our website at

http://www.jawbone.com.

Steps for Pairing Jawbone:

1. Place Jawbone where it is no more than one meter

away from your mobile phone.

2. Ensure Jawbone is off (the LED status indicator

should not be flashing).

3. Activate your mobile phone's Bluetooth function.

Please refer to your mobile phone user guide or

http://www.jawbone.com for details.

4. Press and hold the 'NOISE SHIELD BUTTON'

for 3 seconds until the LED status indicator alternately

flashes white and red. This means Jawbone is now in

pairing mode. This mode will last for 2 minutes or until

pairing is complete.

5. Set the mobile phone to search for all available

Bluetooth devices. When the search is complete, select

"Jawbone" from the list of devices shown.

6. Enter the passkey "0000" and press "OK" to pair

Jawbone with your mobile phone. When the pairing

is completed, Jawbone will beep and the LED status

indicator will then flash white rapidly eight times.

7. If prompted by the phone to connect, select "Yes"

(this will vary between phones).